Massey-Harris Pony 812

Massey-Harris Pony 812The Massey-Harris Pony 812 is a 2WD utility tractor manufactured by Massey-Harris in Marquette-lez-Lille, France from 1951 to 1957. The Massey-Harris Pony 812 is equipped with a 1.2 L (74.4 cu·in) four-cylinder gasoline engine and a gear type transmission with 3 forward and 1 reverse gears.

The Massey-Harris Pony 812 utility tractor used the Simca engine. It is a 1.2 L, 1,220 cm2, (74.4 cu·in) four-cylinder natural aspirated gasoline engine with 72.0 mm (2.83 in) of the cylinder bore and 75.0 mm (2.95 in) of the piston stroke. The compression ratio rating is 6.25:1. This engine produced 16.0 PS (11.8 kW; 15.8 HP) at 1,850 rpm of output power.

The MH Pony 812 is equipped with manual steering, mechanical band brakes, open operator station and 26.1 liters (6.9 US gal.; 5.7 Imp. gal) fuel tank.

Massey-Harris Pony 812 Specifications

General Specifications
Model Massey-Harris Pony 812
Length 2,650 mm (104.3 in)
Width 1,410 mm (55.5 in)
Height 1,550 mm (61 in)
Wheel base 1,690 mm (66.5 in)
Ground clearance 530 mm (20.9 in)
Weight 749 kg (1,651 lbs)
Fuel tank capacity 26.1 liters (6.9 US gal.; 5.7 Imp. gal)
Battery
Cabin type Open operator station
Engine
Engine model Simca
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 1.2 L, 1,220 cm2, (74.4 cu·in)
Bore and stroke 72.0 mm X 75.0 mm (2.83 in X 2.95 in)
Compression ratio 6.25:1
Horsepower 16 PS (11.8 kW; 15.8 HP) at 1,850 rpm
Starter Electric
Oil capacity: 2.8 L (3 US. qt, 2.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Mechanical band
Final drive Spur gear
Transmission model
Transmission type Gear type
Gears 3 forward and 1 reverse
Speed Forward: 11.3 kmh (7 mph) Reverse: 5.2 kmh (3.2 mph)
Transmission oil capacity 3.4 L (0.9 US. gal, 0.7 Imp. gal.)
Tires
Front tires Ag: 4×15
Rear tires Ag: 8×24, 9×24
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*