White 60

White 60The White 60 is a 2WD or 4WD utility tractor from the American series. This tractor was manufactured by White in Coldwater, Ohio, USA from 1989 to 1991. The White 60 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 6 forward and 2 reverse gears or a partial power shift transmission with 18 forward and 6 reverse gears.

The White 60 utility tractor used the Cummins engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm of PTO output power.

The White 60 is equipped with power steering, dry disc brakes, two-post ROPS, and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

White 60 Specifications

General Specifications
Model White 60
Length 3,840 mm (151.2 in)
Width 2,070 mm (81.5 in)
Height (ROPS) 2,450 mm (96.5 in)
Wheel base 2,420 mm (95.3 in)
Ground clearance 450 mm (17.7 in)
Weight
Fuel tank capacity 75.7 liters (20 US gal.; 16.7 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Cummins
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,916 cm2, (239.0 cu·in)
Bore and stroke 102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Horsepower 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 11.0 L (11.6 US. qt, 9.7 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Dry disc
Transmission model
Transmission type Sliding gear with dry disc clutch
Gears 6 forward and 2 reverse
Transmission oil capacity 49.2 L (13 US. gal, 10.8 Imp. gal.)
Transmission model
Transmission type Partial power shift
Gears 18 forward and 6 reverse
Transmission oil capacity 49.2 L (13 US. gal, 10.8 Imp. gal.)
Tires
Front tires Ag: 7.50-16 (2WD), 9.50-24 (4WD)
Rear tires Ag: 16.9-30
Three-Point Hitch
Category I/II
Control type Lower-link
Lift capacity (at ends) 2,040 kg (4,500 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with hydraulic clutch
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 49.2 L (13 US. gal, 10.8 Imp. gal.)
Pressure 2200 psi (151.7 bar)
Valves 1 to 3
Total flow 20.0 gpm (75.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*