The White 2-150 is a 2WD row-crop tractor from the series. This tractor was manufactured by White in from 1975 to 1976. The White 2-150 is equipped with a 9.6 L (585.0 cu·in) six-cylinder diesel engine and one of two transmissions: a unsynchronized transmission with 6 forward and 2 reverse gears or a partial powershift transmission with 18 forward and 6 reverse gears.
The White 2-150 row-crop tractor used the White engine. It is a 9.6 L, 9,586 cm2, (585.0 cu·in) six-cylinder natural aspirated diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. The compression ratio rating is 15.3:1. This engine produced 147 PS (108.1 kW; 145.0 HP) at 2,200 rpm of PTO output power.
The White 2-150 is equipped with hydrostatic power steering, independent hydraulic disc brakes, an open operator station or cab (optional).
White 2-150 Specifications
General Specifications | |
Model | White 2-150 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,820 mm (111.0 in) |
Weight (operating) | 7,685 kg (16,943 lbs) |
Fuel tank capacity | – |
Battery | 12V |
Cabin type | Open operator station or Cab (optional) |
Engine | |
Engine model | White |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 9.6 L, 9,586 cm2, (585.0 cu·in) |
Bore and stroke | 121.0 mm X 140.0 mm (4.76 in X 5.51 in) |
Compression ratio | 15.3:1 |
Horsepower | 147 PS (108.1 kW; 145.0 HP) at 2,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Independent hydraulic disc |
Transmission model | – |
Transmission type | Unsynchronized |
Gears | 6 forward and 2 reverse |
Transmission model | Hydraul-Shift |
Transmission type | Partial powershift |
Gears | 18 forward and 6 reverse |
Speed | Forward: 28.5 kmh (17.7 mph) Reverse: 10.6 kmh (6.6 mph) |
Tires | |
Front tires | Ag: 11.00-16 |
Rear tires | Ag: 18.4-38 |
Three-Point Hitch | |
Category | III |
Control type | – |
Lift capacity | 2,720 kg (6,000 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 1000, 540/1000 (optional) |
Hydraulic system | |
Hydraulic type | Closed center |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment