The AGCO LT90 is a 2WD/4WD utility tractor from the LT series. This tractor was manufactured by the AGCO in Beauvais, France from 2004 to 2006. The AGCO LT90 is equipped with 4.4 L four-cylinders diesel engine and two-speed power shift transmission (16 forward and reverse gear) with electro-hydraulic wet disc clutch.
The AGCO LT90 utility tractor used 4.4 L, 4,408 cm2, (269 cu·in) Cummins four-cylinder turbocharged diesel engine with 104.0 mm (4.09 in) of cylinder bore and 132.0 mm (5.2 in) of piston stroke. This engine produced 111.5 PS (82 kW; 110 HP) at 2,200 rpm of maximum output power and 436 N·m (44.5 kg·m, 321.3 ft·lb) at 1,250 rpm of peak torque.
The AGCO LT90 is equipped with hydraulic power steering, wet disc brakes, two-post ROPS (cab with air-conditioning was available as an option) and 148 liters (39.1 US gal.; 32.6 Imp. gal) fuel tank.
AGCO LT90 Specifications
| General Specifications | |
| Model | AGCO LT90 |
| Length | 4,200 mm (165.4 in) |
| Width | – |
| Height | 2,790 mm (109.8 in) |
| Wheel base | 2,460 mm (96.9 in) |
| Weight | 4,310 kg (9,500 lbs) |
| Fuel tank capacity | 150 liters (39 US gal.; 32.6 Imp. gal) 205 liters (54 US gal.; 45.1 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post ROPS. Cab with air-conditioning (option). |
| Engine | |
| Engine model | Cummins |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.4 L, 4,408 cm2, (269 cu·in) |
| Bore and stroke | 104.0 mm X 132.0 mm (4.09 in X 5.2 in) |
| Compression ratio | 17.5:1 |
| Horsepower | 111.5 PS (82 kW; 110 HP) at 2,200 rpm |
| Torque | 436 N·m (44.5 kg·m, 321.3 ft·lb) at 1,250 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydraulic power |
| Brakes | Wet disc |
| Final drive | Inboard planetary |
| Transmission model | – |
| Transmission type | Two-speed power shift with electro-hydraulic wet disc clutch |
| Gears | 16 forward and reverse |
| Tires | |
| Front tires | – |
| Rear tires | – |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity | 3,500 kg (7,718 lbs) 4,030 kg (8,885 lbs) – option |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO spped | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 2 or 4 |
| Pump flow | 15 gpm (56.8 lpm) 26 gpm (98.4 lpm) – option |
Be the first to comment