The AGCO DT240A is a 4WD row-crop tractor from the DT-A series. This tractor was manufactured by AGCO in Beauvais, France from 2005 to 2008. The AGCO DT240A is equipped with an 8.4 L (513.0 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite (two-range) forward and reverse gears.
The AGCO DT240A row-crop tractor used the Sisu Diesel engine. It is a 8.4 L, 8,407 cm2, (514.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. This engine produced 294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm of output power.
The AGCO DT240A is equipped with hydrostatic power steering, hydraulic wet disc brakes, Cab with optional pneumatic suspension, and 600.0 liters (158.5 US gal.; 132 Imp. gal) fuel tank.
AGCO DT240A Specifications
| General Specifications | |
| Model | AGCO DT240A |
| Length | 5,230 mm (205.9 in) |
| Width | – |
| Height | 3,090 mm (121.7 in) |
| Wheel base | 3,070 mm (120.9 in) |
| Weight | 9,050 kg (19,952 lbs) |
| Fuel tank capacity | 600.0 liters (158.5 US gal.; 132 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab standard with optional pneumatic suspension |
| Engine | |
| Engine model | Sisu Diesel |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.4 L, 8,407 cm2, (514.0 cu·in) |
| Bore and stroke | 111.0 mm X 145.0 mm (4.37 in X 5.71 in) |
| Horsepower | 294.2 PS (216.3 kW; 290.0 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | PowerMaxx CVT |
| Transmission type | Continuously variable transmission |
| Gears | Infinite (two-range) forward and reverse |
| Speed | Forward: 40.2 kmh (25 mph) Reverse: 19.3 (12 mph) |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Caterogy | III |
| Control type | – |
| Lift capacity (at 610 mm / 24 in) | 6,530 kg (14,400 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (200 bar) |
| Valves | 4 or 5 |
| Total flow | 39.0 gpm (147.6 lpm) |
Be the first to comment