Cub Cadet Tank M60 CT

Cub Cadet Tank M60 CTThe Cub Cadet Tank M60 CT is a 2WD zero-turn mower from the Tank M series. This tractor was manufactured by Cub Cadet (a part of MTD) from 2006 to 2008. The Cub Cadet Tank M60 CT is equipped with a 1.1 L (69.0 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet Tank M60 CT zero-turn mower used the Caterpillar 3011C engine. It is a 1.1 L, 1,130 cm2, (69.0 cu·in) three-cylinder natural aspirated diesel engine with 77.0 mm (3.03 in) of the cylinder bore and 81.0 mm (3.19 in) of the piston stroke. This engine produced 28.4 PS (20.9 kW; 28.0 HP) of output power.

The Tank M60 CT is equipped with differential power steering, open operator station, two-post foldable ROPS (optional) and 53.0 liters (14 US gal.; 11.7 Imp. gal) fuel tank.

Cub Cadet Tank M60 CT Specifications

General Specifications
Model Cub Cadet Tank M60 CT
Length 1,980 mm (78 in)
Width
Height
Wheel base 1,280 mm (50.4 in)
Weight 662 kg (1,459 lbs)
Fuel tank capacity 53.0 liters (14 US gal.; 11.7 Imp. gal)
Battery 12V
Cabin type Open operator station, two-post foldable ROPS (optional)
Engine
Engine model Caterpillar 3011C
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,130 cm2, (69.0 cu·in)
Bore and stroke 77.0 mm X 81.0 mm (3.03 in X 3.19 in)
Horsepower 28.4 PS (20.9 kW; 28 HP)
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Differential power
Brakes
Transmission model Hydro-Gear BDP-12
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 16.1 kmh (10.0 mph) Reverse: 8.0 kmh (5.0 mph)
Tires
Front tires Lawn/turf: 13×6.50×6
Rear tires Lawn/turf: 24×12-12
PTO (Power take-off shaft)
Middle PTO type Independent with electric clutch
Middle PTO speed