Cub Cadet Tank M60 KH30

Cub Cadet Tank M60 KH30The Cub Cadet Tank M60 KH30 is a 2WD zero-turn mower from the Tank M series. This tractor was manufactured by Cub Cadet (a part of MTD) during 2009. The Cub Cadet Tank M60 KH30 is equipped with a 0.7 L (45.6 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet Tank M60 KH30 zero-turn mower used the Kohler CV750 engine. It is a 0.7 L, 747 cm2, (45.6 cu·in) two-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 69.0 mm (2.72 in) of the piston stroke. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 3,600 rpm of output power.

The Tank M60 KH30 is equipped with differential power steering, open operator station, two-post foldable ROPS (optional) and 53.0 liters (14 US gal.; 11.7 Imp. gal) fuel tank.

Cub Cadet Tank M60 KH30 Specifications

General Specifications
Model Cub Cadet Tank M60 KH30
Length 1,980 mm (78 in)
Width –
Height –
Wheel base 1,280 mm (50.4 in)
Weight 521 kg (1,149 lbs)
Fuel tank capacity 53.0 liters (14 US gal.; 11.7 Imp. gal)
Battery 12V
Cabin type Open operator station, two-post foldable ROPS (optional)
Engine
Engine model Kohler CV750
Engine type Four-stroke, air-cooled, V
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 747 cm2, (45.6 cu·in)
Bore and stroke 83.0 mm X 69.0 mm (3.27 in X 2.72 in)
Horsepower 30.5 PS (22.4 kW; 30.0 HP) at 3,600 rpm
Starter Electric
Oil capacity: 1.9 L (2.0 US. qt, 1.7 Imp. qt.)
Spark plug Champion RC12YC
Transmission and chassis
Chassis 4×2 2WD
Steering type Differential power
Brakes –
Transmission model Hydro-Gear BDP-12
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 16.1 kmh (10.0 mph) Reverse: 8.0 kmh (5.0 mph)
Tires
Front tires Lawn/turf: 13×6.50×6
Rear tires Lawn/turf: 24×12-12
PTO (Power take-off shaft)
Middle PTO type Independent with electric clutch
Middle PTO speed –

Be the first to comment

Leave a Reply

Your email address will not be published.


*