The Cub Cadet Tank M60 KH EFI is a 2WD zero-turn mower from the Tank M series. This tractor was manufactured by Cub Cadet (a part of MTD) during 2004. The Tank M60 KH EFI is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet Tank M60 KH EFI zero-turn mower used the Kohler CV745 engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 66.0 mm (2.6 in) of the piston stroke. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 3,600 rpm of output power.
The Cub Cadet Tank M60 KH EFI is equipped with differential power steering, open operator station, two-post foldable ROPS (optional) and 53.0 liters (14 US gal.; 11.7 Imp. gal) fuel tank.
Cub Cadet M60 KH EFI Specifications
| General Specifications | |
| Model | Cub Cadet Tank M60 KH EFI |
| Length | 1,980 mm (78 in) |
| Width | – |
| Height | – |
| Wheel base | 1,280 mm (50.4 in) |
| Weight | 521 kg (1,149 lbs) |
| Fuel tank capacity | 53.0 liters (14 US gal.; 11.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station, two-post foldable ROPS (optional) |
| Engine | |
| Engine model | Kohler CV745 |
| Engine type | Four-stroke, air-cooled, V-twin |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 724 cm2, (44.2 cu·in) |
| Bore and stroke | 83.0 mm X 66.0 mm (3.27 in X 2.6 in) |
| Horsepower | 28.4 PS (20.9 kW; 28 HP) at 3,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Differential power |
| Brakes | – |
| Transmission model | Hydro-Gear BDP-12 |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 16.1 kmh (10 mph) Reverse: 8.0 kmh (5 mph) |
| Tires | |
| Front tires | Lawn/turf: 13×6.50×6 |
| Rear tires | Lawn/turf: 24×12-12 |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent with electric clutch |
| Middle PTO speed | – |
Be the first to comment