The David Brown 1210 is a 2WD or 4WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1971 to 1976. The David Brown 1210 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and transmission with 12 forward and 4 reverse gears.
The David Brown 1210 utility tractor used the David Brown engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 61.9 PS (45.5 kW; 61.0 HP) of PTO output power.
The David Brown 1210 is equipped with power steering, differential mechanical shoe brakes, open operator station or Cab (optional), and 81.5 liters (21.5 US gal.; 17.9 Imp. gal) fuel tank.
David Brown 1210 Specifications
| General Specifications | |
| Model | David Brown 1210 |
| Length | 3,630 mm (142.9 in) |
| Width | 1,980 mm (78 in) |
| Height | 2,280 mm (89.8 in) |
| Wheel base |
2WD: 2,260 mm (89.0 in) 4WD: 2,230 mm (88.0 in) |
| Weight |
2WD: 2,660 kg (5,865 lbs) 4WD: 3,135 kg (6,910 lbs) |
| Fuel tank capacity | 81.5 liters (21.5 US gal.; 17.9 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | David Brown |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.6 L, 3,589 cm2, (219.0 cu·in) |
| Bore and stroke | 100.0 mm X 114.0 mm (3.94 in X 4.49 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 61.9 PS (45.5 kW; 61.0 HP) |
| Starter | Electric |
| Coolant capacity: | 14.2 L (15 US. qt, 12.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential mechanical shoe |
| Transmission model | – |
| Transmission type | Synchromesh |
| Gears | 12 forward and 4 reverse |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 10-24 (4WD) |
| Rear tires | Ag: 8.4/15-30 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity (at ends) | 1,995 kg (4,400 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2500 psi (172.4 bar) |
| Pump flow | 6.9 gpm (26.1 lpm) |