David Brown 1212

David Brown 1212The David Brown 1212 is a 2WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1971 to 1976. The David Brown 1212 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a partial power shift transmission with 12 forward and 4 reverse gears.

The David Brown 1212 utility tractor used the David Brown engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 71.9 PS (52.9 kW; 71.0 HP) at 2,300 rpm of output power.

The David Brown 1212 is equipped with hydrostatic power steering, differential mechanical drum brakes, open operator station or Cab (optional) and 80.6 liters (21.3 US gal.; 17.7 Imp. gal) fuel tank.

David Brown 1212 Specifications

General Specifications
Model David Brown 1212
Length 3,630 mm (142.9 in)
Width 1,770 mm (69.7 in)
Height 2,660 mm (104.7 in)
Wheel base 2,260 mm (89 in)
Weight 3,050 kg (6,724 lbs)
Fuel tank capacity 80.6 liters (21.3 US gal.; 17.7 Imp. gal)
Battery 12V, 96Ah
Cabin type Open operator station or Cab (optional)
Engine
Engine model David Brown
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 17.0:1
Horsepower 71.9 PS (52.9 kW; 71.0 HP) at 2,300 rpm
Starter Electric
Oil capacity: 7.5 L (7.9 US. qt, 6.6 Imp. qt.)
Coolant capacity: 14.0 L (14.8 US. qt, 12.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential mechanical drum
Transmission model Hydra-Shift
Transmission type Partial power shift
Gears 12 forward and 4 reverse
Speed Forward: 25.7 kmh (16.0 mph) Reverse: 11.3 (7.0 mph)
Transmission oil capacity 35.0 L (9.2 US. gal, 7.7 Imp. gal.)
Front tires Ag: 7.50-16
Rear tires Ag: 13.6-38
Three-Point Hitch
Caterogy II
Control type
Lift capacity (at ends) 1,995 kg (4,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2000 psi (137.9 bar)
Pump flow 6.9 gpm (26.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*