 The Deutz-Allis 5215 is a 2WD or 4WD compact utility tractor from the 5200 Compact series. This tractor was manufactured by Hinomoto for distributor Deutz-Allis in from 1987 to 1989. The Deutz-Allis 5215 is equipped with a 1.0 L (61.1 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Deutz-Allis 5215 is a 2WD or 4WD compact utility tractor from the 5200 Compact series. This tractor was manufactured by Hinomoto for distributor Deutz-Allis in from 1987 to 1989. The Deutz-Allis 5215 is equipped with a 1.0 L (61.1 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Deutz-Allis 5215 compact utility tractor used the Toyosha engine. It is a 1.0 L, 1,002 cm2, (61.1 cu·in) three-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. The compression ratio rating is 23:1. This engine produced 18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm of output power.
The Deutz-Allis 5215 is equipped with manual steering, differential mechanical drum brakes, two-post ROPS and 14.0 liters (3.7 US gal.; 3.1 Imp. gal) fuel tank.
Deutz-Allis 5215 Specifications
| General Specifications | |
| Model | Deutz-Allis 5215 | 
| Length | 2,730 mm (107.5 in) | 
| Width | 1,130 mm (44.5 in) | 
| Height (ROPS) | 2WD: 1,850 mm (72.8 in) 4WD: 1,840 mm (72.4 in) | 
| Wheel base | 1,400 mm (55.1 in) | 
| Ground clearance (front axle) | 2WD: 320 mm (12.6 in) 4WD: 260 mm (10.2 in) | 
| Weight | 2WD Hydro: 690 kg (1,521 lbs) 4WD Hydro: 785 kg (1,731 lbs) | 
| Fuel tank capacity | 14.0 liters (3.7 US gal.; 3.1 Imp. gal) | 
| Battery | |
| Cabin type | Two-post ROPS. Optional canopy and soft cab. | 
| Engine | |
| Engine model | Toyosha | 
| Engine type | Four-stroke, liquid-cooled, inline | 
| Cylinders | 3 | 
| Fuel type | Diesel | 
| Displacement | 1.0 L, 1,002 cm2, (61.1 cu·in) | 
| Bore and stroke | 73.0 mm X 80.0 mm (2.87 in X 3.15 in) | 
| Compression ratio | 23:1 | 
| Horsepower | 18.2 PS (13.4 kW; 18.0 HP) at 2,500 rpm | 
| Starter | Electric | 
| Oil capacity: | 2.6 L (2.7 US. qt, 2.3 Imp. qt.) | 
| Coolant capacity: | 3.5 L (3.7 US. qt, 3.1 Imp. qt.) | 
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) | 
| Steering type | Manual | 
| Brakes | Differential mechanical drum | 
| Transmission model | – | 
| Transmission type | Synchromesh | 
| Gears | 9 forward and 3 reverse | 
| Transmission model | – | 
| Transmission type | Hydrostatic | 
| Gears | Infinite (3-range) forward and reverse | 
| Speed | Forward: 17.1 kmh (10.6 mph) Reverse: kmh (0 mph) | 
| Transmission oil capacity | 17.0 L (4.5 US. gal, 3.7 Imp. gal.) | 
| Tires | |
| Front tires | Ag: 5.00-10 (2WD), 6.00-12 (4WD) | 
| Rear tires | Ag: 9.5-16 | 
| Three-Point Hitch | |
| Category | I | 
| Control type | – | 
| Lift capacity (at ends) | 550 kg (1213 lbs) | 
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent | 
| Middle PTO speed | 2114 rpm | 
| Rear PTO type | Independent | 
| Rear PTO speed | 540 rpm | 
| Hydraulic system | |
| Hydraulic type | – | 
| Hydraulic capacity | 4.5 L (1.2 US. gal, 1 Imp. gal.) | 
| Valves | 0 to 2 | 
| Total flow | 3.56 gpm (13.5 lpm) | 

Be the first to comment