The Farm Pro 2425 is a 4WD compact utility tractor from the series. This tractor was manufactured by Jinma for distributor Farm Pro in China from 2002 to 2006. The Farm Pro 2425 is equipped with a 1.5 L (93.5 cu·in) three-cylinder diesel engine and a transmission with 12 forward and 4 reverse gears.
The Farm Pro 2425 compact utility tractor used the Y385T engine. It is a 1.5 L, 1,532 cm2, (93.5 cu·in) three-cylinder natural aspirated diesel engine with 85.0 mm (3.35 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 2,350 rpm of output power.
The Farm Pro 2425 is equipped with power steering, two-post ROPS with canopy and 20.8 liters (5.5 US gal.; 4.6 Imp. gal) fuel tank.
Farm Pro 2425 Specifications
| General Specifications | |
| Model | Farm Pro 2425 |
| Length | 2,900 mm (114.2 in) |
| Width | 1,420 mm (55.9 in) |
| Height | 2,180 mm (85.8 in) |
| Wheel base | – |
| Ground clearance | 250 mm (9.8 in) |
| Weight (shipping) | 1,380 kg (3,042 lbs) |
| Fuel tank capacity | 20.8 liters (5.5 US gal.; 4.6 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post ROPS with canopy |
| Engine | |
| Engine model | Y385T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.5 L, 1,532 cm2, (93.5 cu·in) |
| Bore and stroke | 85.0 mm X 90.0 mm (3.35 in X 3.54 in) |
| Horsepower | 25.3 PS (18.6 kW; 25.0 HP) at 2,350 rpm |
| Starter | Electric |
| Oil capacity: | 3.5 L (3.7 US. qt, 3.1 Imp. qt.) |
| Coolant capacity: | 7.9 L (8.3 US. qt, 7 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | – |
| Transmission type | – |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 26.3 kmh (16.3 mph) Reverse: kmh (0 mph) |
| Transmission oil capacity | 14.0 L (3.7 US. gal, 3.1 Imp. gal.) |
| Tires | |
| Front tires | Ag: 6.00-16 |
| Rear tires | Ag: 9.5-24 |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live with two stage clutch |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 9.1 L (2.4 US. gal, 2 Imp. gal.) |
| Total flow | 3.0 gpm (11.4 lpm) |

Be the first to comment