Ingersoll 4020

Ingersoll 4020The Ingersoll 4020 is a 2WD garden tractor from the 4000 series. This tractor was manufactured by Ingersoll in Winneconne, Wisconsin, USA from 1989 to 2004. The Ingersoll 4020 is equipped with a 0.8 L (47.7 cu·in) two-cylinder gasoline engine and a hydraulic drive transmission with infinite forward and reverse (2-range) gears.

The Ingersoll 4020 garden tractor used the Onan P220G engine. It is a 0.8 L, 781 cm2, (47.7 cu·in) two-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. The compression ratio rating is 7.0:1. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm of output power.

The Ingersoll 4020 is equipped with manual (4020) or power (4020ps) steering, open operator station and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Following attachments are available for the Ingersoll 4020 garden tractor:

  • Mid-mount Ingersoll RN44 1,110 mm (44 inches) mower deck with 3-deck
  • Mid-mount Ingersoll RM48 1,210 mm (48 inches) mower deck with 3-deck
  • Mid-mount Ingersoll RM60 1,520 mm (60 inches) mower deck with 3-deck
  • Front-mount Ingersoll UB54 1,370 mm (54 inches) deck
  • Front-mount Ingersoll SB48 1,210 mm (48 inches) snow blower

Ingersoll 4020 Specifications

General Specifications
Model Ingersoll 4020
Length 1,820 mm (71.7 in)
Width 1,040 mm (40.9 in)
Height (steering wheel) 1,100 mm (43.3 in)
Wheel base 1,210 mm (47.6 in)
Ground clearance (rear axle) 270 mm (10.6 in)
Weight 4020: 347 kg (765 lbs)
4020PS: 365 kg (805 lbs)
Fuel tank capacity 11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V, CCA 300A
Cabin type Open operator station
Engine model Onan P220G
Engine type Four-stroke, air-cooled, horizontally-opposed
Cylinders 2
Fuel type Gasoline
Displacement 0.8 L, 781 cm2, (47.7 cu·in)
Bore and stroke 83.0 mm X 73.0 mm (3.27 in X 2.87 in)
Compression ratio 7.0:1
Horsepower 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm
Starter Electric
Spark plug Champion RS14YC
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual (4020) or power (4020PS)
Transmission model Hy-Drive
Transmission type Hydraulic drive
Gears Infinite forward and reverse (2-range)
Speed Forward: 14.0 kmh (8.7 mph) Reverse: kmh (0 mph)
Front tires Lawn/turf: 16×6.50-8
Rear tires Lawn/turf: 32×8.00-16
Three-Point Hitch
Category 0 (optional)
Control type
Lift capacity (at ends)
Hydraulic system
Hydraulic type Open center
Pressure Transmission: 2100 psi (144.8 bar)
Lift: 575 psi (39.6 bar)
Valves 2
Pump flow 8.0 gpm (30.3 lpm)
Total flow 9.5 gpm (36 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.