The International Harvester 140 is a 2WD utility tractor manufactured by International Harvester in from 1958 to 1979. The International Harvester 140 is equipped with a 2.0 L (122.7 cu·in) four-cylinder gasoline engine and a sliding gear with 4 forward and 1 reverse gears and dry disc clutch transmission.
The IH 140 utility tractor used the International Harvester C-123 engine. It is a 2.0 L, 2,011 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.94:1. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 1,400 rpm of output power and 143.7 N·m (14.7 kg·m, 105.9 ft·lb) at 1,400 rpm of peak torque.
The International 140 is equipped with manual worm-and-sector steering, differential mechanical contracting band brakes, open operator station, and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.
International Harvester 140 Specifications
General Specifications | |
Model | International Harvester 140 |
Length | 2,710 mm (106.7 in) |
Width | 1,420 mm (55.9 in) |
Height | 1,660 mm (65.4 in) |
Wheel base | 1,800 mm (70.9 in) |
Ground clearance | 560 mm (22 in) |
Weight () | 1,360 kg (2,998 lbs) |
Fuel tank capacity | 41.6 liters (11 US gal.; 9.2 Imp. gal) |
Battery | 6V (early), 12V (late) |
Cabin type | Open operator station |
Engine | |
Engine model | International Harvester C-123 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 2.0 L, 2,011 cm2, (122.7 cu·in) |
Bore and stroke | 79.0 mm X 102.0 mm (3.11 in X 4.02 in) |
Compression ratio | 6.94:1 |
Horsepower | 28.4 PS (20.9 kW; 28.0 HP) at 1,400 rpm |
Torque | 143.7 N·m (14.7 kg·m, 105.9 ft·lb) at 1,400 rpm |
Starter | Electric |
Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
Coolant capacity: | 14.2 L (15 US. qt, 12.5 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual worm-and-sector |
Brakes | Differential mechanical contracting band |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 4 forward and 1 reverse |
Speed | Forward: 19.8 kmh (12.3 mph) Reverse: 4.7 (2.9 mph) |
Transmission oil capacity | 4.7 L (1.2 US. gal, 1 Imp. gal.) |
Tires | |
Front tires | Ag: 5.00-15 |
Rear tires | Ag: 9.5-24 |
Three-Point Hitch | |
Caterogy | IH Fast Hitch (one-point) |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | IH Touch-Control |
Total flow | 4.6 gpm (17.4 lpm) |