International Harvester 2444

International Harvester 2444The International Harvester 2444 is a 2WD industrial tractor manufactured by International Harvester in Louisville, Kentucky, USA from 1967 to 1971.

The International Harvester 2444 is equipped with one of two engines: a 2.5 L (152.0 cu·in) four-cylinder gasoline engine or a 2.5 L (154.0 cu·in) four-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 2 reverse gears or a manual shuttle transmission with 8 forward and 8 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester C-153. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) four-cylinder natural aspirated gasoline engine with 86.0 mm (3.39 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. This engine produced 47.6 PS (35.0 kW; 47.0 HP) at 2,200 rpm of output power.
  • International Harvester BD-154. It is a 2.5 L, 2,524 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 89.0 mm (3.5 in) and the piston stroke is 102.0 mm (4.02 in). This engine produced 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm of output power.

Following attachments are available for the IH 2444 industrial tractor:

  • International 2050 loader
  • International 3121 backhoe

International Harvester 2444 Specifications

General Specifications
ModelInternational Harvester 2444
Wheel base
Ground clearance
Fuel tank capacity
Cabin typeOpen operator station
Engine modelInternational Harvester C-153
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeGasoline
Displacement2.5 L, 2,491 cm2, (152.0 cu·in)
Bore and stroke86.0 mm X 108.0 mm (3.39 in X 4.25 in)
Horsepower47.6 PS (35.0 kW; 47.0 HP) at 2,200 rpm
Engine modelInternational Harvester BD-154
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement2.5 L, 2,524 cm2, (154.0 cu·in)
Bore and stroke89.0 mm X 102.0 mm (3.5 in X 4.02 in)
Horsepower44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm
Transmission and chassis
Chassis4×2 2WD
Steering typePower
Transmission model
Transmission typeGear type
Gears8 forward and 2 reverse
Transmission model
Transmission typeManual shuttle
Gears8 forward and 8 reverse
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent (optional) or transmission (optional)
Rear PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.