John Deere 3025E

John Deere 3025EThe John Deere 3025E is a 4WD compact utility tractor from the 3E series. This tractor has been manufactured by John Deere in Augusta, Georgia, USA since 2017. The JD 3025E is equipped with a 1.6 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The JD 3025E compact utility tractor used the Yanmar 3TNV88F or engine. It is a 1.6 L, 1,642 cm2, (100.2 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 24.8 PS (18.2 kW; 24.4 HP) at 2,400 rpm of maximum output power.

The John Deere 3025E is equipped with power steering, two-post foldable ROPS and 23.5 liters (6.2 US gal.; 5.2 Imp. gal) or 28.5 liters (7.5 US gal, 6.3 Imp. gal) fuel tank.

John Deere 3025E Specifications

General Specifications
Model John Deere 3025E
Length 2,945 mm (115.9 in)
Width 1,569 mm (61.8 in)
Height 2,422 mm (95.4 in)
Wheel base 1,594 mm (62.8 in)
Weight 1,028 kg (2266 lbs)
Fuel tank capacity 23.5 liters (6.2 US gal.; 5.2 Imp. gal)
28.5 liters (7.5 US gal, 6.3 Imp. gal)
Battery 12V, CCA 500A
Cabin type Two-post foldable ROPS
Engine model Yanmar 3TNV88F-EPJT1 or 3TNV88F-EPJT2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,642 cm2, (100.2 cu·in)
Bore and stroke 88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Compression ratio 19.0:1
Horsepower 24.8 PS (18.2 kW; 24.4 HP) at 2,400 rpm
Torque 87.8 N·m (9 kg·m, 64.7 ft·lb)
Starter Electric
Oil capacity: 3TNV88F-EPJT1: 4.1 L (4.33 US.qts, 3.61 Imp. qts)
3TNV88F-EPJT2: 4.9 L (5.18 US qts, 4.31 Imp. qts)
Coolant capacity: 3TNV88F-EPJT1: 4.0 L (4.23 US qts, 3.52 Imp. qts)
3TNV88F-EPJT2: 4.3 L (4.54 US qts, 3.78 Imp. qts)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Differential lock Mechanical rear
Final drive Spur gear
Front axle case 3.2 L (3.38 US qts, 2.82 Imp. qts)
3.8 L (4.02 US qts, 3.34 Imp. qts)
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 22.7 kmh (14.1 mph) Reverse: 22.7 (14.1 mph)
Transmission oil capacity 21.0 L (5.5 US. gal, 4.6 Imp. gal.)
Front tires Ag: 7-14
Lawn/turf: 27×8.5-15
Industrial: 25×8.5-14
Rear tires Ag: 11.2-24
Lawn/turf: 41×14-20
Industrial: 15-19.5
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 21.0 L (22.19 US. qt, 18.48 Imp. qt.)
Pressure 2500 psi (172.4 bar)
Valves 0 to 2
Pump flow 5.3 gpm (20.1 lpm)
Steering flow 4.0 gpm (15.1 lpm)
Total flow 9.3 gpm (35.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.