The Ursus 1014 is a 2WD or 4WD row-crop tractor was manufactured by Ursus in Warsaw, Poland from 1984 to 2009. The Ursus 1014 is equipped with a 4.6 L (278.3 cu·in) four-cylinder diesel engine and a two-speed power shift transmission with 16 forward and 8 reverse gears and dry disc clutch.
The Ursus 1014 row-crop tractor used the Z8002.1 engine. It is a 4.6 L, 4,560 cm2, (278.3 cu·in) four-cylinder turbocharged diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 97.4 PS (71.6 kW; 96 HP) at 2,200 rpm of output power.
The Ursus 1014 is equipped with power steering, hydraulic dry disc brakes, Cab (standard), and 90.0 liters (23.8 US gal.; 19.8 Imp. gal) fuel tank.
Ursus 1014 Specifications
| General Specifications | |
| Model | Ursus 1014 |
| Length | 3,960 mm (155.9 in) |
| Width | – |
| Height | 2,690 mm (105.9 in) |
| Wheel base | 2,380 mm (93.7 in) |
| Weight | 4,070 kg (8,973 lbs) |
| Fuel tank capacity | 90.0 liters (23.8 US gal.; 19.8 Imp. gal) |
| Battery | Two 6V, 190 Ah |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Z8002.1 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.6 L, 4,560 cm2, (278.3 cu·in) |
| Bore and stroke | 110.0 mm X 120.0 mm (4.33 in X 4.72 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 97.4 PS (71.6 kW; 96.0 HP) at 2,200 rpm |
| Torque | 336.0 N·m (34.3 kg·m, 247.6 ft·lb) at 1,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic dry disc |
| Transmission model | – |
| Transmission type | Two-speed power shift with dry disc clutch |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 25.5 kmh (15.8 mph) Reverse: 11.9 kmh (7.4 mph) |
| Tires | |
| Front tires | Ag: 11.00-16 (2WD), 12.4-24 (4WD) |
| Rear tires | Ag: 18.4-34 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | 3,050 kg (6,725 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Pump flow | 10.8 gpm (40.9 lpm) |
Be the first to comment