Ventrac 3400

Ventrac 3400The Ventrac 3400 is a 4WD lawn tractor from the 3400 series. This tractor was manufactured by Ventrac in Orrville, Ohio, USA from 2014 to 2019.

The Ventrac 3400 is equipped with one of two engines: a 0.6 L (38.3 cu·in) two-cylinder gasoline engine or a 0.9 L (54.8 cu·in) three-cylinder diesel engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Ventrac 3400 used articulated power steering, two-post folding ROPS and 18.9 liters (5 US gal.; 4.2 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • Briggs & Stratton Vanguard M38. It is a 0.6 L, 627 cm2, (38.3 cu·in) two-cylinder natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm of output power.
  • Kubota D902. It is a 0.9 L, 898 cm2, (54.8 cu·in) three-cylinder natural aspirated diesel engine. The cylinder bore is 71.0 mm (2.8 in) and the piston stroke is 74.0 mm (2.91 in). This engine produced 22.3 PS (16.4 kW; 22.0 HP) at 2,850 rpm of output power.

Ventrac 3400 variants

  • 3400L Gasoline
  • 3400Y Diesel

Ventrac 3400 Specifications

General Specifications
Model Ventrac 3400
Length 1,930 mm (76 in)
Width 1,020 mm (40.2 in)
Height 1,820 mm (71.7 in)
Wheel base 960 mm (37.8 in)
Weight 553 kg (1,219 lbs)
Fuel tank capacity 18.9 liters (5 US gal.; 4.2 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS
Engine
Engine model Briggs & Stratton Vanguard M38
Engine type Four-stroke, air-cooled, V
Cylinders 2
Fuel type Gasoline
Displacement 0.6 L, 627 cm2, (38.3 cu·in)
Bore and stroke 75.0 mm X 70.0 mm (2.95 in X 2.76 in)
Horsepower 20.3 PS (14.9 kW; 20.0 HP) at 3,600 rpm
Torque 46.1 N·m (4.7 kg·m, 34 ft·lb) at 2,800 rpm
Starter Electric
Engine
Engine model Kubota D902
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.9 L, 898 cm2, (54.8 cu·in)
Bore and stroke 71.0 mm X 74.0 mm (2.8 in X 2.91 in)
Horsepower 22.3 PS (16.4 kW; 22.0 HP) at 2,850 rpm
Torque 55.6 N·m (5.7 kg·m, 41 ft·lb) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Articulated power
Brakes
Transmission model Hydro-Gear GT1700
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 11.3 kmh (7.0 mph) Reverse: 6.4 kmh (4.0 mph)
Tires
Front tires Lawn/turf: 18×11-10
Rear tires Lawn/turf: 18×11-10
Three-Point Hitch
Type Ventrac Mount System
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*