Yanmar GT14

Yanmar GT14The Yanmar GT14 is a 2WD garden tractor manufactured by Yanmar from 1988 to 1990. The Yanmar GT14 is equipped with a 0.6 L (38.8 cu·in) two-cylinder diesel engine and a power shift transmission with 6 forward and 3 reverse gears.

The Yanmar GT14 garden tractor used the Yanmar 2T75U engine. It is a 0.6 L, 635 cm2, (38.8 cu·in) two-cylinder natural aspirated diesel engine with 75.0 mm (2.95 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. This engine produced 14.1 PS (10.4 kW; 14.0 HP) at 2,600 rpm of output power.

Following attachments are available for the Yanmar GT14 garden tractor:

  • Mid-mount Yanmar 1,210 mm (48 in) mower deck
  • Mid-mount Yanmar 1,520 mm (60 in) mower deck

Yanmar GT14 Specifications

General Specifications
Model Yanmar GT14
Length
Width
Height
Wheel base
Weight
Fuel tank capacity
Battery 12V
Cabin type Open operator station
Engine
Engine model Yanmar 2T75U
Engine type Four-stroke, liquid-cooled
Cylinders 2
Fuel type Diesel
Displacement 0.6 L, 635 cm2, (38.8 cu·in)
Bore and stroke 75.0 mm X 72.0 mm (2.95 in X 2.83 in)
Horsepower 14.1 PS (10.4 kW; 14.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model
Transmission type Power shift
Gears 6 forward and 3 reverse
Tires
Front tires Lawn/turf: –
Rear tires Lawn/turf: –
Three-Point Hitch
Category 0
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed
Rear PTO type Independent
Rear PTO speed 2000 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.