The Zetor Zebra 2040 is a 4WD utility tractormanufactured by the Zetor Zebra. The Zetor Zebra 2040 is equipped with 1.1 L two-cylinders diesel engine and unsynchronized gear transmission with 6 forward and 3 reverse gears.
The Zetor Zebra 2040 utility tractor used the Slavia 2S90A engine. It is a 1.1 L, 1,145 cm2, (69.9 cu·in) two-cylinders air-cooled diesel engine with 90.0 mm (3.54 in) of cylinder bore and 90.0 mm (3.54 in) of piston stroke. The compression ratio rating is 17.2:1 . This engine produced 23.8 PS (17.5 kW; 23.5 HP) at 2,000 rpm of maximum output power.
The Zetor Zebra 2040 is equipped with hydraulic power steering, mechanical drum brakes, foot pedal operated differential lock, open operator station with ROPS and 11.5 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Zetor Zebra 2040 Specifications
| General Specifications | |
| Model | Zetor Zebra 2040 |
| Length | 2,800 mm (110.2 in) |
| Width | 1,190 mm (46.9 in) |
| Height | 1,140 mm (44.9 in) |
| Wheel base | 1,170 mm (46.1 in) |
| Weight | 1,140 kg (2,514 lbs) |
| Fuel tank capacity | 11.5 liters (3 US gal.; 2.5 Imp. gal) |
| Battery | 12V 63A |
| Cabin type | Open operator station with ROPS |
| Engine | |
| Engine model | Slavia 2S90A |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 2 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1,145 cm2, (69.9 cu·in) |
| Bore and stroke | 90.0 mm X 90.0 mm (3.54 in X 3.54 in) |
| Compression ratio | 17.2:1 |
| Horsepower | 23.8 PS (17.5 kW; 23.5 HP) at 2,000 rpm |
| Starter | Electric |
| Oil capacity: | 5.0 L (5.28 US. qt, 4.4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Hydraulic power |
| Brakes | Mechanical drum |
| Transmission model | – |
| Transmission type | Unsynchronized gear |
| Gears | 6 forward and 3 reverse |
| Speed | Forward: 19.3 kmh (12 mph) Reverse: 19.3 (12 mph) |
| Tires | |
| Front tires | Ag: 7.50×16 |
| Rear tires | Ag: 7.50×16 |
| Three-Point Hitch | |
| Caterogy | IN |
| Control type | – |
| Lift capacity | 1080 kg (2381 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO spped | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 3.8 L (4.02 US. qt, 3.34 Imp. qt.) |
| Pump flow | 2.5 gpm (9.5 lpm) |
| Total flow | 2.5 gpm (9.5 lpm) |
Be the first to comment