Zetor 3320

Zetor 3320The Zetor 3320 is a 2WD utility tractor from the Range 1 series. This tractor was manufactured by Zetor in Brno, Czech Republic from 1993 to 1997. The Zetor 3320 is equipped with a 2.7 L (164.6 cu·in) three-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 10 forward and 2 reverse gears or a mech shuttle transmission with 10 forward and 10 reverse gears.

The Zetor 3320 utility tractor used the Zetor Z5201 engine. It is a 2.7 L, 2,697 cm2, (164.6 cu·in) three-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 46.6 PS (34.3 kW; 46.0 HP) at 2,200 rpm of output power.

The Zetor 3320 is equipped with power steering, hydraulic dry disc brakes, cab (standard) or ROPS, and 45.4 liters (12 US gal.; 10 Imp. gal) fuel tank. This tractor could be equipped with the Zetor 100 loader.

Zetor 3320 Specifications

General Specifications
Model Zetor 3320
Length 3,660 mm (144.1 in)
Width 1,800 mm (70.9 in)
Height (cab) 2,560 mm (100.8 in)
Wheel base 2,120 mm (83.5 in)
Ground clearance 490 mm (19.3 in)
Weight 2,870 kg (6,327 lbs)
Fuel tank capacity 45.4 liters (12 US gal.; 10 Imp. gal)
Battery 12V, CCA 950A
Cabin type Cab (standard)
Engine
Engine model Zetor Z5201
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.7 L, 2,697 cm2, (164.6 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 46.6 PS (34.3 kW; 46.0 HP) at 2,200 rpm
Starter Electric
Oil type CD+, CE, CF-4
Oil capacity: 9.0 L (9.5 US. qt, 7.9 Imp. qt.)
Coolant capacity: W/o heater: 9.5 L (10 US. qt, 8.4 Imp. qt.)
With heater: 10.5 L (11 US. qt, 9.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Hydraulic dry disc
Transmission model
Transmission type Synchromesh with hydraulic cerametallic disc clutch
Gears 10 forward and 2 reverse
Speed Forward: 26.2 kmh (16.3 mph) Reverse: 5.6 kmh (3.5 mph)
Transmission model
Transmission type Mech shuttle
Gears 10 forward and 10 reverse
Tires
Front tires Ag: 6.50-16, 7.50×16
Rear tires Ag: 14.9-28, 12.4×36, 16.9×28, 12.4×32
Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 1,750 kg (3,860 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2610 psi (180 bar)
Valves 1
Steering flow 4.0 gpm (15.1 lpm)
Total flow 8.5 gpm (32.2 lpm)