Zetor 4321

Zetor 4321The Zetor 4321 is a 2WD utility tractor from the Range 1 Super series. This tractor was manufactured by Zetor in Brno, Czech Republic from 1997 to 2004. The Zetor 4321 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchronized transmission with 10 forward and 2 reverse gears or a mech shuttle transmission with 10 forward and reverse gears.

The Zetor 4321 utility tractor used the Zetor Z6202 engine. It is a 3.9 L, 3,917 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 102 mm (4.02 in) of the cylinder bore and 120 mm (4.72 in) of the piston stroke. The compression ratio rating is 0. This engine produced 59.8 PS (44 kW; 59 HP) at 2200 rpm of output power.

The Zetor 4321 is equipped with power steering, hydraulic wet disc brakes, two-post folding ROPS or cab (optional with air-conditioning), and 121.1 liters (32 US gal.; 26.6 Imp. gal) fuel tank.

Following attachments are available for the Zetor 4321 utility tractor:

  • Zetor 102H loader
  • Zetor 102SLX loader
  • Zetor 112SLX loader

Zetor 4321 Specifications

General Specifications
Model Zetor 4321
Length 3,580 mm (140.9 in)
Width 1,850 mm (72.8 in)
Height (cab) 2,590 mm (102 in)
Wheel base 1,850 mm (72.8 in)
Ground clearance
Weight 3,000 kg (6,615 lbs)
Fuel tank capacity 121.1 liters (32 US gal.; 26.6 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS. Cab optional with air-conditioning.
Engine
Engine model Zetor Z6202
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,917 cm2, (239.0 cu·in)
Bore and stroke 102 mm X 120 mm (4.02 in X 4.72 in)
Compression ratio 0
Horsepower 59.8 PS (44 kW; 59.0 HP) at 2200 rpm
Starter electric
Oil type CC
Oil capacity: 12.0 L (12.7 US. qt, 10.6 Imp. qt.)
Coolant capacity: 11.6 L (12.3 US. qt, 10.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type power
Brakes hydraulic wet disc
Transmission model
Transmission type Synchronized
Gears 10 forward and 2 reverse
Transmission model
Transmission type Mech shuttle
Gears 10 forward and reverse
Tires
Front tires Ag: 9.00-16
Rear tires Ag: 16.9-28, 16.9-30
Three-Point Hitch
Category Category II/I
Control type Position and draft control
Lift capacity (at ends) 3,100 kg (6,835 lbs)
PTO (Power take-off shaft)
Rear PTO type independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type open center
Hydraulic capacity 64.0 L (16.9 US. gal, 14.1 Imp. gal.)
Pressure 2600 psi (179.3 bar)
Valves 1 to 3
Pump flow 14.0 gpm (53 lpm)
Steering flow 4.0 gpm (15.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*