Zetor 4341

The Zetor 4341 is a 4WD farm tractor from the Range 1 Super series. This tractor was manufactured by the Zetor in Brno, the Czech Republic from 1997 to 2004. The Zetor 4341 is equipped with 3.9 L, 3917 cm2, (239.03 cu·in) four-cylinder diesel engine and synchronized transmission with 10 forward and 2 reverse gears or mech shuttle transmission with 10 forward and 1 reverse gears.

The Zetor 4341 farm tractor used Zetor Z6202 (3.9 L, 3,917 cm2, 239.03 cu·in) four-cylinder liquid-cooled diesel engine with 102 mm (4.02 in) of cylinder bore and 120 mm (4.72 in) of piston stroke. This engine produced 59.8 PS (44 kW; 59 HP) at 2200 rpm of maximum output power.

The Zetor 4341 tractor is equipped with power steering, hydraulic wet disc brakes, two-post folding ROPS (cab available as an option), three-point hitch (category II/I) with position and draft control, independent PTO-shaft and 120 liters (32 US gal.; 26 Imp. gal) fuel tank.

Following attachments are available for Zetor 4341 farm tractor:

  • Front loader Zetor 102H
  • Front loader Zetor 102SLX
  • Front loader Zetor 112SLX

Zetor 4341 Specifications

General Specifications
Model Zetor 4341
Length 3,580 mm (140.9 in)
Width 1,850 mm (72.8 in)
Height 2,590 mm (102 in)
Wheel base 1,850 mm ( in)
Weight 3,430 kg ( lbs)
Fuel tank capacity 120 liters (32 US gal.; 26 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS (Cab available as an option)
Engine model Zetor Z6202
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3917 cm2, (239.03 cu·in)
Bore and stroke 102 mm X 120 mm (4.02 in X 4.72 in)
Compression ratio rating
Horsepower 59.8 PS (44 kW; 59 HP) at 2200 rpm
Starter Electric
Oil type CC
Oil capacity: 12 L (12.68 US. qt, 10.56 Imp. qt.)
Coolant capacity: 11.6 L (12.26 US. qt, 10.21 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model
Transmission type Synchronized
Gears 10 forward and 2 reverse
Transmission model
Transmission type Mech shuttle
Gears 10 forward and reverse
Front tires 11.2-24
Rear tires 16.9-28, 16.9-30 (with cab)
Three-Point Hitch
Caterogy Category II/I
Control type Position and draft control
Lift capacity 3,100 kg (6836 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 3 to 1
Hydraulic capacity 64.0 L (67.63 US. qt, 56.31 Imp. qt.)
Pressure 2600 psi (179.3 bar)
Pump flow 14.0 gpm (53.0 lpm)
Steering flow 4.0 gpm (15.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.