The Kubota M7.171 is a 4WD row-crop tractor from the M7 series. This tractor has been manufactured by Kubota in Bierne, France from 2015. The Kubota M7-171 is equipped with a 6.1 L (374.0 cu·in) four-cylinder diesel engine and one of two transmissions: a power shift transmission with 24 forward and reverse gears or a continuously variable transmission transmission with infinite forward and reverse gears.
The Kubota M7-171 row-crop tractor used the Kubota V6108 engine. It is a 6.1 L, 6,129 cm2, (374.0 cu·in) four-cylinder natural aspirated diesel engine with 118.0 mm (4.65 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. This engine produced 175.4 PS (129.0 kW; 173.0 HP) of output power.
The Kubota M7.171 is equipped with power steering, Cab (standard) and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.
Kubota M7.171 Specifications
| General Specifications | |
| Model | Kubota M7.171 |
| Length | 4,770 mm (187.8 in) |
| Width | Flange axle: 2,490 mm (98 in) Bar axle: 2,790 mm (109.8 in) |
| Height | 3,020 mm (118.9 in) |
| Wheel base | – |
| Weight (shipping) | 6,848 kg (15,097 lbs) |
| Fuel tank capacity | 329.3 liters (87 US gal.; 72.4 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Kubota V6108 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 6.1 L, 6,129 cm2, (374.0 cu·in) |
| Bore and stroke | 118.0 mm X 140.0 mm (4.65 in X 5.51 in) |
| Horsepower | 175.4 PS (129.0 kW; 173.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | ZF |
| Transmission type | Power shift with hydraulic wet disc clutch |
| Gears | 24 forward and reverse |
| Transmission model | ZF |
| Transmission type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 14.9R28 |
| Rear tires | Ag: 18.4R38 |
| Three-Point Hitch | |
| Category | III |
| Control type | Lower-link electronic draft sensing |
| Lift capacity (at ends) | 6,700 kg (14,775 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 1000 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540/540E/1000/1000E rpm |
| Hydraulic system | |
| Hydraulic type | Open center or closed center load sensing |
| Pump flow | 21.0 gpm (79.5 lpm) 29.0 gpm (109.8 lpm) |
Be the first to comment