The Massey Ferguson 2606H is a 2WD/4WD utility tractor from the 2600H series. This tractor has been manufactured by Massey Ferguson since 2016. The Massey Ferguson 2606H is equipped with a 2.6 L (157.9 cu·in) three-cylinder diesel engine and a sync shuttle transmission with 8 forward and 8 reverse gears.
The Massey Ferguson 2606H utility tractor used the Simpson engine. It is a 2.6 L, 2,587 cm2, (157.9 cu·in) three-cylinder turbocharged intercooled diesel engine with 93.0 mm (3.66 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,000 rpm of output power.
The MF 2606H is equipped with power steering, wet disc brakes, two-post folding ROPS and 54.9 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 2606H utility tractor:
- Massey Ferguson L135E loader
- Massey Ferguson 911X loader
Massey Ferguson 2606H Specifications
| General Specifications | |
| Model | Massey Ferguson 2606H |
| Length |
2WD: 3,500 mm (137.8 in) 4WD: 3,530 mm (139 in) |
| Width | 1,770 mm (69.7 in) |
| Height | 2,380 mm (93.7 in) |
| Wheel base |
2WD: 2,040 mm (80.3 in) 4WD: 2,070 mm (81.5 in) |
| Weight | – |
| Fuel tank capacity | 54.9 liters (14.5 US gal.; 12.1 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post folding ROPS |
| Engine | |
| Engine model | Simpson |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.6 L, 2,587 cm2, (157.9 cu·in) |
| Bore and stroke | 93.0 mm X 127.0 mm (3.66 in X 5 in) |
| Horsepower | 66 PS (48.5 kW; 65.0 HP) at 2,000 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Final drive | Outboard planetary |
| Differential lock | Mechanical rear |
| Transmission model | – |
| Transmission type | Sync shuttle |
| Gears | 8 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 7.5×16 (2WD), 9.5×24 (4WD) |
| Rear tires | Ag: 14.9×28 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | – |
| Lift capacity (at 610mm/ 24 in) | 1250 kg (2756 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live (2WD) or independent (4WD) |
| Rear PTO speed | 540 (1.375) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 2 |
| Pump flow | 10.6 gpm (40.1 lpm) |
| Total flow | 15.7 gpm (59.4 lpm) |
Be the first to comment