Massey Ferguson 1739E compact utility tractor: review and specs

The Massey Ferguson 1739E is a 4WD compact utility tractor manufactured by Massey Ferguson (a part of AGCO) from 2013. The Massey Ferguson 1739E is equipped with a 1.5 L (91.3 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 9 forward and 3 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The MF 1739E compact utility tractor used the Shibaura N843T-F engine. It is a 1.5 L, 1,496 cm², (91.3 cu·in) three-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 40.1 PS (29.5 kW; 39.6 HP) at 2,600 rpm of output power.

The Massey Ferguson 1739E is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS and 38.0 liters (10.0 US gal.; 8.4 Imp. gal) fuel tank.

Massey Ferguson 1739E Specifications

General Specifications
Model	Massey Ferguson 1739E
Length	2,950 mm (116.1 in)
Width	1,330 mm (52.4 in)
Height (ROPS)	2,470 mm (97.2 in)
Wheel base	1,670 mm (65.7 in)
Weight	Gear: 1,250 kg (2,756 lbs) Hydro: 1,255 kg (2,767 lbs)
Fuel tank capacity	38.0 liters (10 US gal.; 8.4 Imp. gal)
Battery	12V
Cabin type	Two-post foldable ROPS
Engine
Engine model	Shibaura N843T-F
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	3
Fuel type	Diesel
Displacement	1.5 L, 1,496 cm², (91.3 cu·in)
Bore and stroke	84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Horsepower	40.1 PS (29.5 kW; 39.6 HP) at 2,600 rpm
Starter	Electric
Oil capacity:	4.6 L (4.9 US. qt, 4 Imp. qt.)
Coolant capacity:	5.0 L (5.3 US. qt, 4.4 Imp. qt.)

Transmission and chassis
Chassis	4×4 MFWD 4WD
Steering type	Hydrostatic power
Brakes	Wet disc
Final drive	Bull gear
Differential lock	Rear standard
Transmission model	–
Transmission type	Gear type with dry disc clutch
Gears	9 forward and 3 reverse
Speed	Forward: 21.3 kmh (13.2 mph) Reverse: 12.8 kmh (8 mph)
Transmission oil capacity	37.9 L (10 US. gal, 8.3 Imp. gal.)
Transmission model	–
Transmission type	Hydrostatic
Gears	Infinite (3-range) forward and reverse
Speed	Forward: 23.6 kmh (14.7 mph) Reverse: 18.4 kmh (11.4 mph)
Tires
Front tires	Lawn/turf: 27×8.50-15 Industrial: 27×8.50-15
Rear tires	Lawn/turf: 38×14.00-20 Industrial: 15×19.5

Three-Point Hitch
Category	I
Control type	–
Lift capacity (at ends)	1,000 kg (2,205 lbs)
PTO (Power take-off shaft)
Rear PTO type	Live
Rear PTO speed	540 rpm
Hydraulic system
Hydraulic type	Open center gear pump
SCV flow	7.2 gpm (27.3 lpm)
Steering flow	4.1 gpm (15.5 lpm)
Total flow	11.3 gpm (42.8 lpm)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.