The Fiat F140 is a 4WD row-crop tractor from the Winner series. This tractor was manufactured by Fiat from 1993 to 1996. The Fiat F140 is equipped with a 5.9 L (357.7 cu·in) six-cylinder diesel engine and a hi-lo transmission with 24 forward and 12 reverse gears (48 forward and 24 reverse gears with creeper).
The Fiat F140 row-crop tractor used the Iveco 8065.25 engine. It is a 5.9 L, 5,861 cm2, (357.7 cu·in) six-cylinder turbocharged diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. This engine produced 142 PS (104.4 kW; 140.0 HP) at 2,250 rpm of output power.
The Fiat F140 is equipped with hydrostatic power steering, wet disc brakes, cab (standard) and 220.0 liters (58.1 US gal.; 48.4 Imp. gal) fuel tank.
Fiat F140 Specifications
| General Specifications | |
| Model | Fiat F140 |
| Length | 4,650 mm (183.1 in) |
| Width | – |
| Height | 2,800 mm (110.2 in) |
| Wheel base | 2,780 mm (109.4 in) |
| Weight | 5,300 kg (11,684 lbs) |
| Fuel tank capacity | 220.0 liters (58.1 US gal.; 48.4 Imp. gal) |
| Battery | – |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Iveco 8065.25 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,861 cm2, (357.7 cu·in) |
| Bore and stroke | 104.0 mm X 115.0 mm (4.09 in X 4.53 in) |
| Horsepower | 142 PS (104.4 kW; 140.0 HP) at 2,250 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Hi-Lo with hydraulic cerametallic dry disc clutch |
| Gears | 24 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 16.9-28 Ag: 420/70R28, 480/70R28 |
| Rear tires | Ag: 20.8-38 Ag: 520/70R38, 580/70R38 |
| Three-Point Hitch | |
| Category | III/II |
| Control type | Position control and lower-link draft sensing |
| Lift capacity | 6,570 kg (14,490 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic clutch |
| Rear PTO speed | 540/1000 or 540/750/1000 (optional) |
| Hydraulic system | |
| Hydraulic type | – |
| Pump flow | 14.5 gpm (54.9 lpm) |
Be the first to comment