Fiat 80-90

Fiat 80-90The Fiat 80-90 is a 2WD or 4WD (80-90DT) utility tractor from the 90 series. This tractor was manufactured by Fiat from 1984 to 1992. The Fiat 80-90 is equipped with a 4.0 L (243.4 cu·in) four-cylinder diesel engine and one of three transmissions: a gear type transmission with 12 forward and 4 reverse gears, a shuttle transmission with 12 forward and 12 reverse gears (20 forward and 12 reverse gears with creeper) or a Hi-Lo transmission with 24 forward and 12 reverse gears.

The Fiat 80-90 utility tractor used the Fiat 8045.05 engine. It is a 3.9 L, 3,898 cm2, (238.0 cu·in) four-cylinder natural aspirated diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. This engine produced 81.2 PS (59.7 kW; 80.0 HP) at 2,500 rpm of output power.

The Fiat 80-90 is equipped with power steering, hydraulic wet disc brakes, cab with heater, and 93.0 liters (24.6 US gal.; 20.5 Imp. gal) fuel tank.

Fiat 80-90 Specifications

General Specifications
Model Fiat 80-90
Length 3,660 mm (144.1 in)
Width
Height 2,630 mm (103.5 in)
Wheel base 2,330 mm (91.7 in)
Weight 2WD: 3,010 kg (6,636 lbs)
4WD: 3,420 kg (7,540 lbs)
Fuel tank capacity 93.0 liters (24.6 US gal.; 20.5 Imp. gal)
Battery 12V
Cabin type Cab with heater
Engine
Engine model Fiat 8045.05
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,898 cm2, (238.0 cu·in)
Bore and stroke 104.0 mm X 115.0 mm (4.09 in X 4.53 in)
Horsepower 81.2 PS (59.7 kW; 80.0 HP) at 2,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Final drive Planetary
Differential lockr Hydraulic rear
Transmission model
Transmission type Gear type
Gears 12 forward and 4 reverse
Transmission model
Transmission type Shuttle
Gears 12 forward and 12 reverse
Transmission model
Transmission type Hi-Lo
Gears 24 forward and 12 reverse
Tires
Front tires Ag: 7.50-18 (2WD), 11.2-28 (4WD)
Rear tires Ag: 13.6-38
Three-Point Hitch
Caterogy II/I
Control type
Lift capacity (at ends) 3,500 kg (7,720 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with dry disc clutch
Rear PTO speed 540, 540/1,000 rpm
Hydraulic system
Hydraulic type
Pressure 2755 psi (189.9 bar)
Pump flow 9.1 gpm (34.4 lpm)