The Allis Chalmers 185 is a 2WD row-crop tractor manufactured by the Allis Chalmers from 1970 to 1981. The Allis Chalmers 185 is equipped with 4.9 L diesel engine and partial power shift transmission with 8 forward and 2 reverse gears.
The Allis Chalmers 185 row-crop tractor used 4.9 L, 4,933 cm2, (301 cu·in) six-cylinder diesel engine with 98.0 mm (3.86 in) of cylinder bore and 108.0 mm (4.25 in) of piston stroke. The compression ratio rating is 16.0:1.
The AC 185 is equipped with hydrostatic power steering, differential mechanical band, and disc brakes, open operator station and 93 liters (24.6 US gal.; 20.5 Imp. gal) fuel tank.
Allis Chalmers 185 Specifications
| General Specifications | |
| Model | Allis Chalmers 185 |
| Length | 4,010 mm (157.9 in) |
| Width | 1,940 mm (76.4 in) |
| Height | 1,940 mm (76.4 in) |
| Wheel base | 2,510 mm (98.8 in) |
| Weight | 3,950 kg (8,708 lbs) |
| Fuel tank capacity | 93 liters (24.6 US gal.; 20.5 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station. Two-post ROPS and canopy (optional) |
| Engine | |
| Engine model | Allis-Chalmers |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 4.9 L, 4,933 cm2, (301.03 cu·in) |
| Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
| Compression ratio | 16.0:1 |
| Horsepower | – |
| Starter | Electric |
| Oil capacity: | 10.5 L (11.1 US. qt, 9.24 Imp. qt.) |
| Coolant capacity: | 16.0 L (16.91 US. qt, 14.08 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Differential mechanical band and disc |
| Transmission model | Allis-Chalmers Power Director |
| Transmission type | Partial power shift |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 25.6 kmh (15.9 mph) Reverse: 25.8 (16 mph) |
| Transmission oil capacity | 7.4 L (7.82 US. qt, 6.51 Imp. qt.) |
| Tires | |
| Front tires | Ag: 7.50-16; 6.50-16; 7.50-20; 9.5L-15 |
| Rear tires | Ag: 16.9-28; 13.6-38; 15.5-38; 18.4-28; 18.4-30 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Continuous |
| Rear PTO spped | 540; 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open |
| Hydraulic capacity | 24.6 L (25.99 US. qt, 21.64 Imp. qt.) |
| Valves | 2 |
| Total flow | 20 gpm (75.7 lpm) |
I have a allis Chalmers 185 diesel. I had a hydraulic hose break and hydrolic oil leaked out. I put too much hydraulic oil back in. How do I drain some oil out to get it back in the limits on the oil dip stick ? Thanks You