Long 360

Long 360The Long 360 is a 2WD or 4WD utility tractor manufactured by UTB/Universal for Long in Brasov, Romania from 1977 to 1991. The Long 360 is equipped with a 2.3 L (142.8 cu·in) three-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 6 forward and 2 reverse gears or a transmission with 8 forward and 2 reverse gears.

The Long 360 utility tractor used the Uzina D-115 engine. It is a 2.3 L, 2,340 cm2, (142.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 38.5 PS (28.3 kW; 38.0 HP) at 2255 rpm of output power.

The Long 360 is equipped with manual or power (optional) steering, independent contracting band brakes, open operator station and 53.9 liters (14.2 US gal.; 11.9 Imp. gal) fuel tank.

Long 360 Specifications

General Specifications
Model Long 360
Length 2,870 mm (113 in)
Width –
Height 1,400 mm (55.1 in)
Wheel base 1,900 mm (74.8 in)
Ground clearance 450 mm (17.7 in)
Weight 2,030 kg (4,475 lbs)
Fuel tank capacity 53.9 liters (14.2 US gal.; 11.9 Imp. gal)
Battery 12V, CCA 100A or 135A (optional)
Cabin type Open operator station
Engine
Engine model Uzina D-115
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,340 cm2, (142.8 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 38.5 PS (28.3 kW; 38.0 HP) at 2255 rpm
Torque 130.4 N·m (13.3 kg·m, 96.1 ft·lb) at 1590 rpm
Starter Electric
Oil capacity: 7.8 L (8.2 US. qt, 6.9 Imp. qt.)
Coolant capacity: 12.8 L (13.5 US. qt, 11.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (optional)
Brakes Independent contracting band
Transmission model –
Transmission type Partially synchronized
Gears 6 forward and 2 reverse
Speed Forward: 23.5 kmh (14.6 mph) Reverse: 11.9 (7.4 mph)
Transmission oil capacity 17.0 L (4.5 US. gal, 3.7 Imp. gal.)
Transmission model –
Transmission type –
Gears 8 forward and 2 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 14.9-28
Three-Point Hitch
Caterogy II/I
Control type –
Lift capacity (at ends) 1,200 kg (2,645 lbs)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 17.0 L (17.96 US. qt, 14.96 Imp. qt.)
Valves 1
Total flow 5.75 gpm (21.8 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*