Long 360

Long 360The Long 360 is a 2WD or 4WD utility tractor manufactured by UTB/Universal for Long in Brasov, Romania from 1977 to 1991. The Long 360 is equipped with a 2.3 L (142.8 cu·in) three-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 6 forward and 2 reverse gears or a transmission with 8 forward and 2 reverse gears.

The Long 360 utility tractor used the Uzina D-115 engine. It is a 2.3 L, 2,340 cm2, (142.8 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 38.5 PS (28.3 kW; 38.0 HP) at 2255 rpm of output power.

The Long 360 is equipped with manual or power (optional) steering, independent contracting band brakes, open operator station and 53.9 liters (14.2 US gal.; 11.9 Imp. gal) fuel tank.

Long 360 Specifications

General Specifications
Model Long 360
Length 2,870 mm (113 in)
Width
Height 1,400 mm (55.1 in)
Wheel base 1,900 mm (74.8 in)
Ground clearance 450 mm (17.7 in)
Weight 2,030 kg (4,475 lbs)
Fuel tank capacity 53.9 liters (14.2 US gal.; 11.9 Imp. gal)
Battery 12V, CCA 100A or 135A (optional)
Cabin type Open operator station
Engine
Engine model Uzina D-115
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,340 cm2, (142.8 cu·in)
Bore and stroke 95.0 mm X 110.0 mm (3.74 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 38.5 PS (28.3 kW; 38.0 HP) at 2255 rpm
Torque 130.4 N·m (13.3 kg·m, 96.1 ft·lb) at 1590 rpm
Starter Electric
Oil capacity: 7.8 L (8.2 US. qt, 6.9 Imp. qt.)
Coolant capacity: 12.8 L (13.5 US. qt, 11.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power (optional)
Brakes Independent contracting band
Transmission model
Transmission type Partially synchronized
Gears 6 forward and 2 reverse
Speed Forward: 23.5 kmh (14.6 mph) Reverse: 11.9 (7.4 mph)
Transmission oil capacity 17.0 L (4.5 US. gal, 3.7 Imp. gal.)
Transmission model
Transmission type
Gears 8 forward and 2 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 14.9-28
Three-Point Hitch
Caterogy II/I
Control type
Lift capacity (at ends) 1,200 kg (2,645 lbs)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 17.0 L (17.96 US. qt, 14.96 Imp. qt.)
Valves 1
Total flow 5.75 gpm (21.8 lpm)