International Harvester 1456

International Harvester 1456The International Harvester 1456 is a 2WD or 4WD standard-tread tractor manufactured by International Harvester from 1969 to 1971. The International 1456 is equipped with a 6.7 L (407.0 cu·in) six-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 4 reverse gears or a partial power shift transmission with 16 forward and 8 reverse gears.

The IH 1456 standard-tread tractor used the International Harvester DT407 engine. It is a 6.7 L, 6,669 cm2, (407.0 cu·in) six-cylinder turbocharged diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 117.0 mm (4.61 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 131.8 PS (96.9 kW; 130.0 HP) at 2,400 rpm of output power.

The International 1456 is equipped with hydrostatic power steering, independent hydraulic dry disc brakes, open operator station or cab with heat and A/C (optional), and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank.

International Harvester 1456 Specifications

General Specifications
Model International Harvester 1456
Length 4,160 mm (163.8 in)
Width –
Height 2,180 mm (85.8 in)
Wheel base 2,660 mm (104.7 in)
Weight 5,810 kg (12,809 lbs)
Fuel tank capacity 159.0 liters (42 US gal.; 35 Imp. gal)
Battery Two 6V, CCA 204A
Cabin type Open operator station or Cab with heat and A/C (optional)
Engine
Engine model International Harvester DT407
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.7 L, 6,669 cm2, (407.0 cu·in)
Bore and stroke 110.0 mm X 117.0 mm (4.33 in X 4.61 in)
Compression ratio 17.0:1
Horsepower 131.8 PS (96.9 kW; 130.0 HP) at 2,400 rpm
Starter Electric
Oil capacity: 12.3 L (13 US. qt, 10.8 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Independent hydraulic dry disc
Transmission model –
Transmission type Gear type
Gears 8 forward and 4 reverse
Speed Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 (10 mph)
Transmission oil capacity 83.3 L (22 US. gal, 18.3 Imp. gal.)
Transmission model Torque Amplifier
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 (10 mph)
Transmission oil capacity 83.3 L (22 US. gal, 18.3 Imp. gal.)
Tires
Front tires Ag: 11L-15
Rear tires Ag: 18.4-38
Three-Point Hitch
Caterogy III/II
Control type –
Lift capacity (at ends) –
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type –
Pump flow 12.0 gpm (45.4 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*