The Cub Cadet i1050 is a 2WD zero-turn mower from the iSeries series. This tractor was manufactured by Cub Cadet (a part of MTD) from 2007 to 2009. The Cub Cadet i1050 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet i1050 zero-turn mower used the Kohler SV710 engine. It is a 0.7 L, 725 cm2, (44.2 cu·in) two-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. The compression ratio rating is 9.0:1. This engine produced 25.3 PS (18.6 kW; 25.0 HP) at 3,600 rpm of output power.
The Cub Cadet i1050 is equipped with differential steering, dry disc brakes, an open operator station, and 10.6 liters (2.8 US gal.; 2.3 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet i1050 zero-turn mower:
- Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blade
- Front-mount Cub Cadet 46 in (1,160 mm) blade
- Front-mount Cub Cadet 42 in (1,060 mm) snow blower
Cub Cadet i1050 Specifications
| General Specifications | |
| Model | Cub Cadet i1050 |
| Length | 1,750 mm (68.9 in) |
| Width | 1,520 mm (59.8 in) |
| Height | – |
| Wheel base | 1,200 mm (47.2 in) |
| Weight | 267 kg (589 lbs) |
| Fuel tank capacity | 10.6 liters (2.8 US gal.; 2.3 Imp. gal) |
| Battery | 12V, CCA 235A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler SV710 |
| Engine type | Four-stroke, air-cooled |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 725 cm2, (44.2 cu·in) |
| Bore and stroke | 83.0 mm X 67.0 mm (3.27 in X 2.64 in) |
| Compression ratio | 9.0:1 |
| Horsepower | 25.3 PS (18.6 kW; 24.9 HP) at 3,600 rpm |
| Torque | 59.6 N·m (6.1 kg·m, 43.9 ft·lb) at 2,800 rpm |
| Starter | Electric |
| Oil capacity: | 1.5 L (1.6 US. qt, 1.3 Imp. qt.) |
| Spark plug | Champion RC12YC |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Differential |
| Brakes | Dry disc |
| Transmission model | Hydro-Gear EZT |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 9.7 kmh (6 mph) Reverse: 5.1 kmh (3.2 mph) |
| Tires | |
| Front tires | Lawn/turf: 15×6.00-6 |
| Rear tires | Lawn/turf: 20×8.00-8 |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent with electric clutch |
| Middle PTO speed | – |
Be the first to comment