Ford 1300

Ford 1300The Ford 1300 is two-wheel (2WD) or a four-wheel (4WD) compact utility tractor from the Hundred compact series, manufactured by Japanese company Shibaura for Ford brand from 1979 to 1982. The Ford 1300 tractor is equipped with two-cylinders Shibaura LEK802D diesel engine with 0.8 L, 804 cc (49.1 cu-in) of displacement and gear shift transmission with 12 forward and 4 reverse gears.

The Ford 1300 tractor used a two-cylinder naturally-aspirated liquid-cooled diesel engine Shibaura LEK802D, with 80.0 mm (3.15 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. Compression ratio rating is 23.0:1. It produced 16.2 PS (11.9 kW; 16.0 HP) of gross horsepower. The power rating at PTO shaft is 13.6 PS (10 kW; 13.4 HP). The engine used dry air cleaner and pre-heating glow plugs.

This utility tractor is equipped with gear shift transmission with 12 forward (1.1-18.6 km/h, 0.7-11.6 mph) and 4 reverse (1.3-13.0 km/h, 0.8-8.1 mph) gears. The tractor used manual steering, differential mechanical drum brakes, and live type hydraulic system.

The 1300 tractor can use the following attachments:

  • Mid-mount Ford 915 mower deck with 3-blades (cutting width: 1,520 mm (60 in.)
  • Front-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,520 mm (60 in.)
  • Front-end loader Ford 770
  • Backhoe Ford 757

The Ford 1300 used a rollover protection structure (ROPS) for operators. The tractor has rear PTO shaft with 540 rpm, front PTO was available as an option.

Ford 1300 specifications

General Specifications
ModelFord 1300
Length2,680 mm (105.6 in.)
Height2,120 mm (83.8 in.) with ROPS
Wheelbase1,440 mm (56.7 in.)
Ground clearance330 mm (13.0 in.)
Weight804 kg (1,773 lb.)
Fuel tank capacity22.0 L (5.8 US gal.)
Battery12V 72A
Engine modelShibaura LEK802D
Number of Cylinders2
Firing order2-1
Displacement0.8 L, 804 cc (49.1
Bore x stroke80.0 x 80.0 mm (3.15 x 3.15 in)
Power output Gross: 16.2 PS (11.9 kW; 16.0 HP)
PTO: 13.6 PS (10 kW; 13.4 HP)
Starter typeElectric starter
Oil type
Governed Speeds Low Idle: 750-850 rpm;
High Idle: 2,850-2,900 rpm; (no load)
Rated: 2,700 rpm (full load)
Oil capacity4.0 L (4.2 U.S. qt)
Coolant capacity4.0 L (4.2 U.S. qt)
Injection Timing, B.T.D.C.23°-24°
Injector opening pressure11,760 kPa (1705 psi)
Valve clearance Intake: 0.30 mm (0.012 in.)
Exhaust: 0.30 mm (0.012 in.)
Tires size
Front tires Ag (2WD): 4.00-12
Ag (4WD): 6.00-14
Turf / Lawn (2WD): 23×8.0-10
Turf / Lawn (4WD): 25×8.5-14
Rear tires Ag: 8.3-24
Turf: 13.6-16
Transmission and chassis
Chassis2×4 WD or 4WD 4×4 MFWD 4WD (opton)
Transmission typeGear shift
Gears12 forward and 4 reverse
Ground speed Forward: up to 18.6 km/h (11.6 mph)
Reverse: up to 13.0 km/h (8.1 mph)
PTO (Power take-off shaft)
PTO Type: Rear, transmission
PTO Speed:540 rpm
Hydraulic lift
3-point linkage:Category I
Control system:
No. of remote valves:
Max lifting capacity (at link end):649 kg (1,432 lb.)
Hydraulic system
Total flow
Oil capacity (Transmission, Rear Axle and Hydraulic System)20.0 L (21.0 US. qt.)
Front axle differential case1.5 L (1.6 U.S. qt.)
Front axle reduction case (Each)0.18 L (0.19 U.S. qt.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.