Ford 4600

Ford 4600The Ford 4600 is a 2WD utility tractor manufactured by the Ford Motor Company from 1975 to 1981. The Ford 4600 is equipped with one of two engines: 3.3 L three-cylinder diesel engine or 3.3 L three-cylinder gasoline engine and gear type transmission with dry disc clutch (8 forward and 2 reverse gears).

The Ford 4600 utility tractor is equipped with power steering, differential mechanical wet disc brakes, open operator station (Cab was available as an option) and 60.0 liters (15.9 US gal.; 13.2 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • Ford (diesel). It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 60.4 PS (44.4 kW; 59.5 HP) at 2,200 rpm of maximum output power.
  • Ford (gasoline). It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder natural aspirated gasoline engine. The cylinder bore is 112.0 mm (4.41 in) and the piston stroke is 112.0 mm (4.41 in). The compression ratio rating is 7.75:1. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm of maximum output power.

Following attachments are available for Ford 4600 utility tractor:

  • Ford 772A loader
  • Ford 772QT loader

Ford 4600 Specifications

General Specifications
ModelFord 4600
Length3,490 mm (137.4 in)
Width1,710 mm (67.3 in)
Height1,460 mm (57.5 in)
Wheel base2,140 mm (84.3 in)
Weight2,670 kg (5,886 lbs)
Fuel tank capacity60.0 liters (15.9 US gal.; 13.2 Imp. gal)
Battery12V
Cabin typeOpen operator station. Cab optional.
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke112.0 mm X 112.0 mm (4.41 in X 4.41 in)
Compression ratio16.3:1
Horsepower60.4 PS (44.4 kW; 59.5 HP) at 2,200 rpm
Torque212.9 N·m (21.7 kg·m, 156.9 ft·lb) at 1,200 rpm
StarterElectric
Oil capacity:6.6 L (6.97 US. qt, 5.81 Imp. qt.)
Coolant capacity:10.4 L (10.99 US. qt, 9.15 Imp. qt.)
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeGasoline
Displacement3.3 L, 3,294 cm2, (201.0 cu·in)
Compression ratio7.75:1
Bore and stroke112.0 mm X 112.0 mm (4.41 in X 4.41 in)
Horsepower60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm
Torque212.9 N·m (21.7 kg·m, 156.9 ft·lb) at 1,100 rpm
Starterelectric
Oil capacity:6.6 L (6.97 US. qt, 5.81 Imp. qt.)
Coolant capacity:10.4 L (10.99 US. qt, 9.15 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower
BrakesDifferential mechanical wet disc
Differential lockMechanical rear
Transmission model
Transmission typeGear type with dry disc clutch
Gears8 forward and 2 reverse
Speed Forward: 24.1 kmh (15 mph) Reverse: 11.6 (7.2 mph)
Transmission oil capacity12.0 L (3.2 US. gal, 2.6 Imp. gal.)
Tires
Front tiresAg: 7.50-16
Rear tiresAg: 16.9-30
Three-Point Hitch
CaterogyI
Control type
Lift capacity1,400 kg (3,087 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540 rpm
Hydraulic system
Hydraulic type
Pump flow8.5 gpm (32.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*