Hinomoto E16 / E16D

Hinomoto E16The Hinomoto E16 is a two-wheel compact utility tractor, manufactured by Japanese company Hinomoto from 1977 to 1979. This utility tractor is equipped with two-cylinders liquid-cooled Toyosha S110 diesel engine with 1.1 l (1106 cc, 67.31 cu-in) of displacement and gear transmission with 6 (3×2) forward and 2 (1×2) reverse gears. This tractor was available in four-wheel version and was called E16D.

The E16 tractor used a two-cylinder naturally-aspirated liquid-cooled Toyosha S110 diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 91.0 mm (3.58 in.) of piston stroke. This motor produced 16.2 PS (11.9 kW; 16 HP) of maximum horsepower.

This utility tractor is equipped with gear shift transmission with 6 forward (up to 13.0 km/h, 8.1 mph) and 2 reverse (up to 9.8 km/h, 6.1 mph) gears. The Hinomoto E16 used mechanical steering, standard PTO-shaft, molded asbestos single plate dry clutch and an open operator station.

Hinomoto E16 specifications

General Specifications
Model Hinomoto E16
Length 2,360 mm (93 in.)
Width 1,140 mm (45 in.)
Height 1,260 mm (50 in.)
Wheelbase 1,360 mm (53 in.)
Ground clearance 280 mm (28 in.)
Weight E16 (2WD): 741 kg (1,635 lb.)
E16D (4WD): 798 kg (1,760 lb.)
Fuel tank capacity
Battery 12V
Engine
Engine model Toyosha S110
Fuel Diesel
Displacement 1.1 L, 1,106 L (67.3 cu.in.)
Bore x stroke 88.0 x 91.0 mm (3.46 x 3.58 in)
Power output 16.2 PS (11.9 kW; 16 HP)
Torque
Starter type Electric starter
Oil type
Oil capacity
Coolant capacity
Valve clearance Intake: 0.30 mm (0.012 in.)
Exhaust: 0.35 mm (0.014 in.)
Tires size
Front tires 4.00-12
Rear tires 8.3-24
Transmission and chassis
Chassis E16: 4×2 2WD
E16D: 4×4 MFWD 4WD
Steering Mechanical
Transmission type Gear
Gears 6 forward and 2 reverse
Ground speed Forward: up to 13.0 kmh (8.1 mph)
Reverse: up to 9.8 kmh (6.1 mph)
Transmission oil capacity
PTO (Power take-off shaft)
PTO Type: Rear
PTO Speed: 547 / 875 / 1000 rpm
Hydraulic lift
3-point linkage: Category I
Control system:
No. of remote valves:
Max lifting capacity (at link end):
Hydraulic system
Type
Pump flow
Oil capacity