J.I. Case 2090

J.I. Case 2090The J.I. Case 2090 is a 2WD row-crop tractor from the 90 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1979 to 1983. The J.I. Case 2090 is equipped with an 8.3 L (504.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 12 forward and 3 reverse gears.

The J.I. Case 2090 row-crop tractor used the J.I. Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder natural aspirated diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 109.5 PS (80.5 kW; 108 HP) at 2,100 rpm of PTO output power.

The J.I. Case 2090 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, four-post ROPS or Silent Guardian cab with air-conditioning (optional), and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

J.I. Case 2090 Specifications

General Specifications
Model J.I. Case 2090
Length
Width
Height
Wheel base 2,640 mm (103.9 in)
Weight (operating) Cab: 5,460 kg (12,037 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery 12V
Cabin type Four-post ROPS or Silent Guardian cab with air-conditioning (optional)
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 16.0:1
Horsepower 109.5 PS (80.5 kW; 108.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 36.0 L (38 US. qt, 31.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model
Transmission type Partial power shift
Gears 12 forward and 3 reverse
Speed Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Closed center
Pump flow 21.0 gpm (79.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*