J.I. Case 4490

J.I. Case 4490The J.I. Case 4490 is a four-wheel drive tractor from the 90 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1979 to 1983. This tractor is equipped with a 8.3 L (504.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 4 reverse gears with hydraulic wet disc.

The J.I. Case 4490 four-wheel drive used the Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 213 PS (156.6 kW; 210.0 HP) at 2,200 rpm of output power.

The J.I. Case 4490 is equipped with power four-wheel steering, hydraulic dry disc brakes, Silent Guardian cab (standard) and 484.5 liters (128 US gal.; 106.6 Imp. gal) fuel tank.

J.I. Case 4490 Specifications

General Specifications
Model J.I. Case 4490
Length 5,890 mm (231.9 in)
Width 2,430 mm (95.7 in)
Height –
Wheel base 2,590 mm (102 in)
Ground clearance 450 mm (17.7 in)
Weight (operating) 9,450 kg (20,834 lbs)
Fuel tank capacity 484.5 liters (128 US gal.; 106.6 Imp. gal)
Battery 12V
Cabin type Silent Guardian cab (standard)
Engine
Engine model Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 15.8:1
Horsepower 213 PS (156.6 kW; 210.0 HP) at 2,200 rpm
Starter Electric
Coolant capacity: 45.4 L (48 US. qt, 39.9 Imp. qt.)
Transmission and chassis
Chassis 4×4 4WD
Steering type Power four-wheel
Brakes Hydraulic dry disc
Final drive Outboard planetary
Transmission model –
Transmission type Three-speed power shift with hydraulic wet disc
Gears 12 forward and 4 reverse
Speed Forward: 28.0 kmh (17.4 mph) Reverse: 28.0 kmh (17.4 mph)
Tires
Front tires Ag: 18.4-34
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type –
Lift capacity (at ends) 4,900 kg (10,805 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Closed center
Pressure 2250 psi (155.1 bar)
Valves 2 to 4
Pump flow 31.0 gpm (117.3 lpm)
SCV flow 24.0 gpm (90.8 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*