John Deere X115R

John Deere X115RThe John Deere X115R is a 2WD rear-discharge mower from the X100 series. This tractor has been manufactured by John Deere in Greeneville, Tennessee, USA since 2015. The John Deere X115R is equipped with a 0.3 L (20.7 cu·in) single-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The John Deere X115R rear-discharge mower used the Briggs & Stratton Model 21 engine. It is a 0.3 L, 339 cm2, (20.7 cu·in) single-cylinder natural aspirated gasoline engine with 87.0 mm (3.43 in) of the cylinder bore and 57.0 mm (2.24 in) of the piston stroke. This engine produced 9.4 PS (6.9 kW; 9.3 HP) at 3,350 rpm of output power.

The John Deere X115R is equipped with manual steering, open operator station, 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank, and mid-mount the John Deere 36 in (910 mm) mower deck with a manual lift.

John Deere X115R Specifications

General Specifications
Model John Deere X115R
Length 2,527 mm (99.5 in)
Width 960 mm (37.8 in)
Height 1,140 mm (44.9 in)
Wheel base
Weight 230 kg (507 lbs)
Fuel tank capacity 7.6 liters (2 US gal.; 1.7 Imp. gal)
Battery 12V Type BCI Group U1
Cabin type Open operator station
Engine
Engine model Briggs & Stratton Model 21
Engine type Four-stroke, air-cooled,
Cylinders 1
Fuel type Gasoline
Displacement 0.3 L, 339 cm2, (20.7 cu·in)
Bore and stroke 87.0 mm X 57.0 mm (3.43 in X 2.24 in)
Horsepower 9.4 PS (6.9 kW; 9.3 HP) at 3,350 rpm
Starter Electric
Oil type SAE 10W-30, 10W-40
Oil capacity: 1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model Tuff Torq K46
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.4 kmh (5.2 mph) Reverse: 4.8 (3 mph)
Tires
Front tires Lawn/turf: 15×6.00-6
Rear tires Lawn/turf: 18×8.5-8
PTO (Power take-off shaft)
Middle PTO type Independent with mechanical clutch
Middle PTO speed