The John Deere X754 is a 2WD lawn and garden tractor from the X700 series. This tractor has been manufactured by John Deere in Horicon, Wisconsin, USA since 2013. The John Deere X754 is equipped with a 1.0 L (60.6 cu·in) three-cylinder diesel engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.
The John Deere X754 garden tractor used the Yanmar 3TNM74 engine. It is a 1.0 L, 993 cm2, (60.6 cu·in) three-cylinder natural aspirated diesel engine with 74.0 mm (2.91 in) of the cylinder bore and 77.0 mm (3.03 in) of the piston stroke. The compression ratio rating is 23.2:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) of output power. The export version of this tractor used the Yanmar 3TNM72 engine.
The JD X754 is equipped with four-wheel hydrostatic power steering, internal wet disc brakes, open operator station, and 19.7 liters (5.2 US gal.; 4.3 Imp. gal) fuel tank.
Following attachments are available for the JD X754 garden tractor:
- Mid-mount John Deere: 48 in (1,210 mm) mower deck with 3-blades
- Mid-mount John Deere: 54 in (1,370 mm) mower deck with 3-blades
- Mid-mount John Deere: 60 in (1,510 mm) mower deck with 3-blades
- Front-mount John Deere: 54 in (1,370 mm) dual-stage snowblower with hydraulic lift
John Deere X754 Specifications
| General Specifications | |
| Model | John Deere X754 |
| Length | 2,010 mm (79.1 in) |
| Width | 1,190 mm (46.9 in) |
| Height | 1,350 mm (53.1 in) |
| Wheel base | 1,380 mm (54.3 in) |
| Weight | 451 kg (994 lbs) |
| Fuel tank capacity | 19.7 liters (5.2 US gal.; 4.3 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Yanmar 3TNM74 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.0 L, 993 cm2, (60.6 cu·in) |
| Bore and stroke | 74.0 mm X 77.0 mm (2.91 in X 3.03 in) |
| Compression ratio | 23.2:1 |
| Horsepower | 24.3 PS (17.9 kW; 24.0 HP) |
| Starter | Electric |
| Oil capacity: | 3.2 L (3.4 US. qt, 2.8 Imp. qt.) |
| Coolant capacity: | 2.8 L (3 US. qt, 2.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Four-wheel hydrostatic power |
| Brakes | Internal wet disc |
| Transmission model | Tuff Torq K90 |
| Transmission type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 8.5 kmh (5.3 mph) Reverse: 5.0 (3.1 mph) |
| Transmission oil capacity | 5.6 L (1.5 US. gal, 1.2 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 18×8.50-8 |
| Rear tires | Lawn/turf: 26×12-12 |
| Three-Point Hitch | |
| Caterogy | 0 (optional) or I Limited (optional) |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electro-hydraulic clutch |
| Front PTO speed | rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |