The Kubota BX25D is a 4WD backhoe loader tractor from the BX series. This tractor was manufactured by Kubota from 2013 to 2016. The Kubota BX25D is equipped with a 0.9 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Kubota BX25D backhoe loader tractor used the Kubota D902 engine. It is a 0.9 L, 898 cm2, (54.8 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 73.6 mm (2.9 in) of the piston stroke. This engine produced 23.4 PS (17.2 kW; 23.0 HP) of maximum output power.
The Kubota BX25D is equipped with power steering, wet disc type brakes, open operator station with folding ROPS and 25.0 liters (6.6 US gal.; 5.5 Imp. gal) fuel tank.
Following attachments are available for the Kubota BX25D backhoe loader tractor:
- Mid-mount Kubota RCK54 54 in (1,370 mm) mower deck with 3-blades
- Mid-mount Kubota RCK60 60 in (1,520 mm) mower deck with 3-blades
- Front-mount Kubota 50 in (1,270 mm) snowblower
- Kubota LA240A loader
- Kubota BT602 backhoe
Kubota BX25D Specifications
| General Specifications | |
| Model | Kubota BX25D |
| Length | 2,420 mm (95.3 in) |
| Width | 1,130 mm (44.5 in) |
| Height | 2,210 mm (87 in) |
| Wheel base | 1,390 mm (54.7 in) |
| Weight | 1,120 kg (2,470 lbs) |
| Fuel tank capacity | 25.0 liters (6.6 US gal.; 5.5 Imp. gal) |
| Battery | 12V, CCA: 535A |
| Cabin type | Open operator station with folding ROPS |
| Engine | |
| Engine model | Kubota D902 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.9 L, 898 cm2, (54.8 cu·in) |
| Bore and stroke | 72.0 mm X 73.6 mm (2.83 in X 2.9 in) |
| Horsepower | 23.4 PS (17.2 kW; 23.0 HP) |
| Starter | Electric |
| Oil capacity: | 3.1 L (3.3 US. qt, 2.7 Imp. qt.) |
| Coolant capacity: | 2.6 L (2.7 US. qt, 2.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc type |
| Differential lock | Rear standard |
| Transmission model | HST |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Speed | Forward: 13.5 kmh (8.4 mph) Reverse: 10.5 (6.5 mph) |
| Transmission oil capacity | 11.5 L (3 US. gal, 2.5 Imp. gal.) |
| Tires | |
| Front tires | Industrial: 18×8.5-10 |
| Rear tires | Industrial: 26×12-12 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | Position control |
| Lift capacity (at ends) | 450 kg (992 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent |
| Middle PTO spped | 2,500 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 11.7 L (12.36 US. qt, 10.29 Imp. qt.) |
| Pump flow | 6.2 gpm (23.5 lpm) |