Mitsubishi MT372

Mitsubishi MT372The Mitsubishi MT372 is a 2WD or 4WD sub-compact utility tractor manufactured by Mitsubishi from 1982 to 1988. The Mitsubishi MT372 is equipped with a 0.7 L (40.8 cu·in) two-cylinder diesel engine and a gear type transmission with 6 forward and 2 reverse gears and dry disc clutch.

The Mitsubishi MT372 sub-compact utility tractor used the Mitsubishi KE70 engine. It is a 0.7 L, 668 cm2, (40.8 cu·in) two-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. The compression ratio rating is 20.0:1. This engine produced 15.2 PS (11.2 kW; 15.0 HP) at 2,700 rpm of output power.

The Mitsubishi MT372 is equipped with manual steering, an open operator station and 15.1 liters (4 US gal.; 3.3 Imp. gal) fuel tank.

Mitsubishi MT372 Specifications

General Specifications
Model Mitsubishi MT372
Length 2WD: 1,960 mm (77.2 in)
4WD: 1,950 mm (76.8 in)
Width 960 mm (37.8 in)
Height (steering wheel) 1,180 mm (46.5 in)
Wheel base –
Weight 2WD: 484 kg (1,067 lbs)
4WD: 533 kg (1,175 lbs)
Fuel tank capacity 15.1 liters (4 US gal.; 3.3 Imp. gal)
Battery 12V, 45Ah
Cabin type Open operator station
Engine
Engine model Mitsubishi KE70
Engine type Four-stroke, liquid-cooled, inline
Cylinders 2
Fuel type Diesel
Displacement 0.7 L, 668 cm2, (40.8 cu·in)
Bore and stroke 73.0 mm X 80.0 mm (2.87 in X 3.15 in)
Compression ratio 20.0:1
Horsepower 15.2 PS (11.2 kW; 15.0 HP) at 2,700 rpm
Starter Electric
Oil capacity: 3.0 L (3.2 US. qt, 2.6 Imp. qt.)
Coolant capacity: 4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual
Brakes –
Final drive Spur gear
Differential lock Mechanical rear
Transmission model –
Transmission type Gear type with dry disc clutch
Gears 6 forward and 2 reverse
Speed Forward: 12.0 kmh (7.5 mph) Reverse: 6.0 kmh (3.7 mph)
Transmission oil capacity 12.0 L (3.2 US. gal, 2.6 Imp. gal.)
Tires
Front tires Ag: 4.00-8 (2WD), 5-12 (4WD)
Rear tires Ag: 8-16
Three-Point Hitch
Category I
Control type –
Lift capacity (at ends) –
PTO (Power take-off shaft)
Rear PTO type –
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pressure 1920 psi (132.4 bar)
Pump flow 3.6 gpm (13.6 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*