Simplicity Regent 4211

Simplicity Regent 4211The Simplicity Regent 4211 is a 2WD lawn tractor from the 4200 series. This tractor was manufactured by Simplicity (a part of Allis Chalmers) in Port Washington, Wisconsin, USA from 1979 to 1986. The Simplicity Regent 4211 is equipped with a 0.4 L (24.3 cu·in) single-cylinder gasoline engine and one of two transmissions: a belt-driven gear transmission (4211G) with 5 forward and 1 reverse gear or a belt-driven hydrostatic transmission (4211H) with infinite forward and reverse gears.

The Simplicity Regent 4211 lawn tractor used the Briggs & Stratton 252707 engine. It is a 0.4 L, 399 cm2, (24.3 cu·in) single-cylinder natural aspirated gasoline engine with 87.0 mm (3.43 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 11.2 PS (8.2 kW; 11.0 HP) at 3,600 rpm of output power.

The Simplicity Regent 4211 is equipped with manual steering, an open operator station, and 8.3 liters (2.2 US gal.; 1.8 Imp. gal) fuel tank.

Following attachments are available for the Simplicity Regent 4211 lawn tractor:

  • Mid-mount Simplicity 910 mm (36 in) mower deck with 2-blades and manual lift
  • Front-mount Simplicity 1,060 mm (42 in) blade
  • Front-mount Simplicity 910 mm (36 in) single-stage snow blower

Simplicity Regent 4211 Specifications

General Specifications
Model Simplicity Regent 4211
Length 1,650 mm (65 in)
Width 890 mm (35 in)
Height (steering wheel) 990 mm (39 in)
Wheel base 1,150 mm (45.3 in)
Ground clearance Front axle: 230 mm (9.1 in)
Rear axle: 130 mm (5.1 in)
Fuel tank capacity 8.3 liters (2.2 US gal.; 1.8 Imp. gal)
Battery 12V, 39Ah
Cabin type Open operator station
Engine model Briggs & Stratton 252707
Engine type Four-stroke, air-cooled, inline
Cylinders 1
Fuel type Gasoline
Displacement 0.4 L, 399 cm2, (24.3 cu·in)
Bore and stroke 87.0 mm X 67.0 mm (3.43 in X 2.64 in)
Horsepower 11.2 PS (8.2 kW; 11.0 HP) at 3,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Transmission model
Transmission type 4211G: Belt-driven gear
Gears 5 forward and 1 reverse
Speed Forward: 6.4 kmh (4 mph) Reverse: 2.1 kmh (1.3 mph)
Transmission model
Transmission type 4211H: Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.8 kmh (5.5 mph) Reverse: kmh (0 mph)
Front tires Lawn/turf: 13×5.00-8
Rear tires Lawn/turf: 18×9.50-8
PTO (Power take-off shaft)
Front PTO type Independent with manual clutch
Front PTO speed – rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.