The Snapper 1650 is a 2WD garden tractor manufactured by Snapper in Fort Worth, Texas, USA from 1979 to 1984. The Snapper 1650 is equipped with a 0.6 L (35.9 cu·in) single-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse (2-range) gears.
The Snapper 1650 garden tractor used the Kohler K341 engine. It is a 0.6 L, 588 cm2, (35.9 cu·in) single-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 83.0 mm (3.27 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of output power.
The Snapper 1650 is equipped with manual steering, disc brakes, an open operator station, and 13.2 liters (3.5 US gal.; 2.9 Imp. gal) fuel tank.
Following attachments are available for the Snapper 1650 garden tractor:
- Mid-mount Snapper 48 in (1,210 mm) mower deck with 3-blade
- Front-mount Snapper 48 in (1,210 mm) blade
- Front-mount Snapper 42 in (1,060 mm) snow blower
Snapper 1650 Specifications
| General Specifications | |
| Model | Snapper 1650 |
| Length | 1,790 mm (70.5 in) |
| Width | 1,050 mm (41.3 in) |
| Height (steering wheel) | 1,150 mm (45.3 in) |
| Wheel base | 1,190 mm (46.9 in) |
| Weight | 1650: 390 kg (860 lbs) 1650A: 430 kg (948 lbs) |
| Fuel tank capacity | 13.2 liters (3.5 US gal.; 2.9 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler K341 |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.6 L, 588 cm2, (35.9 cu·in) |
| Bore and stroke | 95.0 mm X 83.0 mm (3.74 in X 3.27 in) |
| Horsepower | 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Disc |
| Transmission model | Eaton |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse (2-range) |
| Speed | Forward: 17.7 kmh (11.0 mph) Reverse: 12.9 kmh (8.0 mph) |
| Tires | |
| Front tires | Lawn/turf: 16×6.50-8 |
| Rear tires | Lawn/turf: 23×10.50-12 |
| Three-Point Hitch | |
| Category | 0 (optional) |
| Control type | – |
| Lift capacity (at ends) | 294 kg (648 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electric clutch |
| Front PTO speed | – |
| Rear PTO type | Independent (optional) |
| Rear PTO speed | 1,000 rpm |
Be the first to comment