The White 2-105 is a 2WD row-crop tractor from the Field Boss series. This tractor was manufactured by White in from 1974 to 1982. The White 2-105 is equipped with a 5.8 L (354.0 cu·in) six-cylinder diesel engine and one of two transmissions: a unsynchronized transmission with gears or a partial powershift transmission with 18 forward and 6 reverse gears.
The White 2-105 row-crop tractor used the Perkins engine. It is a 5.8 L, 5,801 cm2, (354.0 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 106.5 PS (78.3 kW; 105 HP) at 2,200 rpm of output power.
The White 2-105 is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, cab optional with heat and A/C.
Following attachments are available for the White 2-105 row-crop tractor:
- White 1730-QA loader
- White 1840-QA loader
White 2-105 Specifications
General Specifications | |
Model | White 2-105 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,780 mm (109.4 in) |
Weight (operating) | 5,360 kg (11,815 lbs) |
Fuel tank capacity | – |
Battery | 12V |
Cabin type | Cab optional with heat and A/C |
Engine | |
Engine model | Perkins |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 5.8 L, 5,801 cm2, (354.0 cu·in) |
Bore and stroke | 98.0 mm X 127.0 mm (3.86 in X 5 in) |
Compression ratio | 16.0:1 |
Horsepower | 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Independent hydraulic wet disc |
Transmission model | – |
Transmission type | Unsynchronized |
Gears | – |
Transmission model | Hydraul-Shift |
Transmission type | Partial powershift |
Gears | 18 forward and 6 reverse |
Speed | Forward: 30.4 kmh (18.9 mph) Reverse: 11.1 kmh (6.9 mph) |
Tires | |
Front tires | Ag: 11L-15 |
Rear tires | Ag: 18.4-38 |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment