White 2-75

White 2-75The White 2-75 is a 2WD or 4WD utility tractor from the Field Boss series. This tractor was manufactured by the Iseki for White from 1982 to 1987. The White 2-75 is equipped with 5.4 L six-cylinder diesel engine and synchromesh transmission with 16 forward and 4 reverse gears.

The White 2-75 utility tractor used the Isuzu engine. It is a 5.4 L, 5,392 cm2, (329 cu·in) six-cylinder diesel engine with 102.0 mm (4.02 in) of cylinder bore and 110.0 mm (4.33 in) of piston stroke. This engine produced 76.4 PS (56.2 kW; 75.4 HP) at 2,200 rpm of maximum output power.

The White 2-75 is equipped with hydrostatic power steering, foot-activated differential lock, differential wet disc brakes, two-post ROPS (rollover protection structure) and 80.0 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.

White 2-75 Specifications

General Specifications
Model White 2-75
Length 3,890 mm (153.1 in)
Width 1,870 mm (73.6 in)
Height 2,550 mm (100.4 in)
Wheel base 2,300 mm (90.6 in)
Weight 4,365 kg (9,624 lbs)
Fuel tank capacity 80.0 liters (21.1 US gal.; 17.6 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Isuzu
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.4 L, 5,392 cm2, (329 cu·in)
Bore and stroke 102.0 mm X 110.0 mm (4.02 in X 4.33 in)
Horsepower 76.4 PS (56.2 kW; 75.4 HP) at 2,200 rpm
Starter Electric
Oil capacity: 16.0 L (16.91 US. qt, 14.08 Imp. qt.)
Coolant capacity: 18.3 L (19.34 US. qt, 16.1 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD (opti
Steering type Hydrostatic power
Brakes Differential wet disc
Transmission model
Transmission type Synchromesh
Gears 16 forward and 4 reverse
Speed Forward: 24.0 kmh (14.9 mph) Reverse: 10.5 (6.5 mph)
Transmission oil capacity 33.4 L (35.29 US. qt, 29.39 Imp. qt.)
Tires
Front tires Ag: 7.50-18 (2WD); 11.20-24 (4WD)
Rear tires Ag: 16.9-34 (2WD); 16.9-34 (4WD)
Three-Point Hitch
Caterogy II/I
Control type
Lift capacity 2,400 kg (5,300 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 33.3 L (35.19 US. qt, 29.3 Imp. qt.)
Pressure 2560 psi (176.5 bar)
Valves 1 to 3
Total flow 11.9 gpm (45 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*