The J.I. Case 1470 Traction King is a 4WD four-wheel drive tractor, manufactured by J.I. Case from 1969 to 1972. The J.I. Case 1470 Traction King is equipped with a 8.3 L (504.1 cu·in) six-cylinder diesel engine and a transmission with 8 forward and 4 reverse gears.
The J.I. Case 1470TK four-wheel-drive tractor used the J.I. Case engine. It is a 8.3 L, 8,260 cm2, (504.1 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 127.8 PS (94.0 kW; 126.0 HP) at 2,000 rpm of output power.
The J.I. Case 1470 TK is equipped with four-wheel hydraulic power steering, hydraulic disc brakes, an open operator station or cab (optional), and 265 liters (70 US gal.; 58.3 Imp. gal) fuel tank.
J.I. Case 1470 Traction King Specifications
| General Specifications | |
| Model | J.I. Case 1470 Traction King |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,590 mm (102 in) |
| Ground clearance | – |
| Weight (operating) | 7,850 kg (17,306 lbs) |
| Fuel tank capacity | 265 liters (70 US gal.; 58.3 Imp. gal) |
| Battery | – |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | J.I. Case |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.3 L, 8,260 cm2, (504.1 cu·in) |
| Bore and stroke | 117.0 mm X 127.0 mm (4.61 in X 5 in) |
| Compression ratio | 16.5:1 |
| Horsepower (drawbar) | 127.8 PS (94.0 kW; 126.0 HP) at 2,000 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 4WD |
| Steering type | Four-wheel hydraulic power steering |
| Brakes | Hydraulic disc |
| Transmission model | – |
| Transmission type | – |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 22.4 kmh (13.9 mph) Reverse: 20.8 kmh (12.9 mph) |
| Tires | |
| Front tires | Ag: 28.1-26, 18.4×30 |
| Rear tires | Ag: 28.1-26, 18.4×30 |
| Three-Point Hitch | |
| Category | III |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO speed | 1,000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Pump flow | 15.5 gpm (58.7 lpm) |
Be the first to comment