The Oliver 2655 is a four-wheel drive tractor manufactured by Oliver in Minneapolis, Minnesota, USA from 1971 to 1972.
The Oliver 2655 is equipped with one of two engines: a 9.6 L (585.0 cu·in) six-cylinder diesel engine or a 8.3 L (504.0 cu·in) six-cylinder LP-gas engine and a transmission with 10 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- Minneapolis-Moline diesel engine. It is a 9.6 L, 9,586 cm2, (585.0 cu·in) six-cylinder natural aspirated diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. The compression ratio rating is 15.3:1. This engine produced 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm of output power.
- Minneapolis-Moline LP-gas engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder natural aspirated LP-gas engine. The cylinder bore is 117.0 mm (4.61 in) and the piston stroke is 127.0 mm (5 in). This engine produced 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm of output power.
The Oliver 2655 is equipped with hydrostatic power steering, hydraulic dry disc brakes, cab (standard), and 378.5 liters (100 US gal.; 83.3 Imp. gal) fuel tank.
Oliver 2655 Specifications
| General Specifications | |
| Model | Oliver 2655 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 3,040 mm (119.7 in) |
| Weight (operating) | 9,000 kg (19,842 lbs) |
| Fuel tank capacity | 378.5 liters (100 US gal.; 83.3 Imp. gal) |
| Battery | |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Minneapolis-Moline |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 9.6 L, 9,586 cm2, (585.0 cu·in) |
| Bore and stroke | 121.0 mm X 140.0 mm (4.76 in X 5.51 in) |
| Compression ratio | 15.3:1 |
| Horsepower | 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm |
| Starter | Electric |
| Coolant capacity: | 31.2 L (33 US. qt, 27.5 Imp. qt.) |
| Engine | |
| Engine model | Minneapolis-Moline |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | LP-gas |
| Displacement | 8.3 L, 8,259 cm2, (504.0 cu·in) |
| Bore and stroke | 117.0 mm X 127.0 mm (4.61 in X 5 in) |
| Horsepower | 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 articulated 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic dry disc |
| Transmission model | – |
| Transmission type | – |
| Gears | 10 forward and 2 reverse |
| Speed | Forward: 38.1 kmh (23.7 mph) Reverse: 10.5 kmh (6.5 mph) |
| Tires | |
| Front tires | Ag: 18.4-34 |
| Rear tires | Ag: 18.4-34 |
| Three-Point Hitch | |
| Category | III/II |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 121.1 L (32 US. gal, 26.6 Imp. gal.) |
| Valves | 2 or 3 |
| Pump flow | 21.0 gpm (79.5 lpm) |
Be the first to comment