The John Deere 8110 is a 2WD/4WD row-crop tractor from the 8000 Ten series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1999 to 2002. The John Deere 8110 is equipped with a 8.1 L (496.0 cu·in) six-cylinder diesel engine and a powershift transmission with 16 forward and 4 reverse gears.
The John Deere 8110 row-crop tractor used the John Deere engine. It is a 8.1 L, 8,128 cm2, (496.0 cu·in) six-cylinder turbocharged aftercooled diesel engine with 116.0 mm (4.57 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 167.3 PS (123.0 kW; 164.9 HP) of PTO output power.
The JD 8110 is equipped with hydrostatic power steering, disc brakes, Cab (standard) and 511.0 liters (135 US gal.; 112.4 Imp. gal) fuel tank.
John Deere 8110 Specifications
| General Specifications | |
| Model | John Deere 8110 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,950 mm (116.1 in) |
| Ground clearance | 580 mm (22.8 in) |
| Weight | – |
| Fuel tank capacity | 511.0 liters (135 US gal.; 112.4 Imp. gal) |
| Battery | Two 12V, CCA 925A |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.1 L, 8,128 cm2, (496.0 cu·in) |
| Bore and stroke | 116.0 mm X 129.0 mm (4.57 in X 5.08 in) |
| Compression ratio | 16.5:1 |
| Horsepower | 167.3 PS (123.0 kW; 164.9 HP) |
| Torque | 794.6 N·m (81 kg·m, 585.6 ft·lb) |
| Starter | Electric |
| Oil capacity: | 28.0 L (29.6 US. qt, 24.6 Imp. qt.) |
| Coolant capacity: | 34.0 L (35.9 US. qt, 29.9 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Steering type | Hydrostatic power |
| Brakes | Disc |
| Transmission model | – |
| Transmission type | PowerShift |
| Gears | 16 forward and 4 reverse |
| Tires | |
| Front tires | Ag: 16.9R30 |
| Rear tires | Ag: 18.4R46 |
| Three-Point Hitch | |
| Category | III, IIIN |
| Control type | – |
| Lift capacity) | 4,717 kg (10,400 lbs) Optional: 6,425 kg (14,165 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000 or 540/1000 (optional) |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Valves | 3 to 5 |
| Pump flow | 30.0 gpm (113.6 lpm) |
Be the first to comment