The Allis Chalmers 6060 is a 2WD/4WD row-crop tractor from the 6000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1980 to 1984. The Allis Chalmers 6060 is equipped with a 3.3 L (200.0 cu·in) four-cylinder diesel engine and a partially synchronized transmission with 8 forward and 2 reverse gears.
The Allis Chalmers 6060 row-crop tractor used the Allis Chalmers 433T engine. It is a 3.3 L, 3,277 cm2, (200.0 cu·in) four-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 14.1:1. This engine produced 71.0 PS (52.2 kW; 70.0 HP) at 2,300 rpm of output power.
The AC 6060 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, four-post ROPS or Cab (optional), and 121.0 liters (32 US gal.; 26.6 Imp. gal) fuel tank.
Allis Chalmers 6060 Specifications
| General Specifications | |
| Model | Allis Chalmers 6060 |
| Length | 3,720 mm (146.5 in) |
| Width | 1,730 mm (68.1 in) |
| Height | ROPS: 2,730 mm (107.5 in) Cab: 2,620 mm (103.2 in) |
| Wheel base | 2WD: 2,360 mm (92.9 in) 4WD: 2,330 mm (91.9 in) |
| Weight (ballasted) | 4,060 kg (8,951 lbs) |
| Fuel tank capacity | 121.0 liters (32 US gal.; 26.6 Imp. gal) |
| Battery | One 12V, Two 12V (optional) |
| Cabin type | Four-post ROPS or Cab (optional) |
| Engine | |
| Engine model | Allis Chalmers 433T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.3 L, 3,277 cm2, (200.0 cu·in) |
| Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
| Compression ratio | 14.1:1 |
| Horsepower | 71.0 PS (52.2 kW; 70.0 HP) at 2,300 rpm |
| Starter | Electric |
| Oil capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
| Coolant capacity: | 16.1 L (17 US. qt, 14.2 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential hydraulic wet disc |
| Transmission model | – |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 24.0 kmh (14.9 mph) Reverse: 11.1 (6.9 mph) |
| Transmission oil capacity | 11.4 L (3 US. gal, 2.5 Imp. gal.) |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 11.2-24 (4WD) |
| Rear tires | Ag: 16.9-28 (2WD), 18.4-28 (4WD) |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity (at 610 mm / 24 in) | 1,585 kg (3,495 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 4 |
| Pump flow | 11.4 gpm (43.2 lpm) |
| Total flow | 19.0 gpm (71.9 lpm) |
Be the first to comment